Page 2
The suggestive instructions 1. Before connection, operation and adjust the bed, please read and the user manual carefully. 2. This electric massage bed uses a three-wire power cable. Meanwhile it should be inserted into the three-hole outlet where there is a ground electrode. And it should be assured that it can be connected to the ground electrode smoothly so that it can prevent people from getting electric shock while functioning normally.
Page 3
specification ● : size:2080*870*710mm Min :710mm Max:910mm Net weight:158 kg capacity:200kg Filling materials:sponge leather:PU/PVC Input voltage: AC100~130V/220~240V, 50/60Hz Output voltage:DC 24V Power rate:160W...
Page 4
Use specification ●hand control as below show: Hand control specification: ①button:turn on/off hand control, press button,turn on hand control,press again button,turn off hand control,bed back to original position,press again button,bed stop recover. ②button:press button,bed rise up, press button,bed descend. ③button:press button to adjust backrest incline angle ④button:press...
Page 6
●armrest adjust Press down the gas lift in the arrow direction and Original Gas lift handle condition not release the hand,meanwhile slightly press down the armrest Original condition can adjust its angle,otherwise it will Gas lift handle recover,as picture: ● power socket position as picture:...
Screw nut rubber foot Maintenance 1. Daily cleaning You can wipe out the dust by using soft dry towel. 2. Eliminating the stubborn dirt As we all know, it is hard to eliminate the stubborn dirt by using normal dry towel. In this case, you can use soft towel with diluted neutral detergent to clean it first.
Page 8
although the switch is on. Twist tight line of hand Operate light of Hand control broken or line of control,if still not hand control is off hand controller loose work,replace hand controller Remarks: It will be not informed if the improvements of the product do not influence appearance and function.
Need help?
Do you have a question about the Cloud Electric Spa Treatment Table and is the answer not in the manual?
Questions and answers