ASM CBF-1 Instructions

CAUTION: DO NOT USE THE COVER LIFT IN HIGH WIND CONDITIONS. DO-
ING SO COULD CAUSE THE COVER TO FALL. DAMAGE TO THE SPA COVER/
COVER LIFT, OR INJURY TO THE OCCUPANTS MAY OCCUR. NEVER LEAVE
AN UNCOVERED HOT TUB OR SPA UNATTENDED
ONE YEAR WARRANTY
CBF-1 PIVOT BOTTOM MOUNT HYDRAULIC SHOCK LIFTER
ASM Manufacturing LLC warrants this product to be free from defects in
workmanship and material, under normal use and service conditions, for a one-year
Warranty.
This warranty extends only to the original purchaser. What we will do to help with
warranty replacement. We will repair or replace the product subject to receiving
acceptable photos and or the defective parts shipped to us freight prepaid. Our warranty
does not include the return shipping cost of the replacement parts and or a new cover lift.
This warranty does not extend to any product or damage to a product caused by or
attributable to freight damage, abuse, misuse, improper or abnormal usage or
Specifically waterlogged spa covers or for commercial, rental purposes and or used as
store display models.
No other warranty beyond that specifically set forth above is authorized and we are not
responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or damages with respect to any
economic loss, loss of property, loss or revenues or profits, loss of enjoyment or use,
costs of removal, installation or other consequential damages of whatsoever nature.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any
implied warranties for a particular purpose is limited in its scope and duration to the
terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you. This warranty gives you specific legal rights.
You may also have other rights which vary from state to state.
ASM Manufacturing LLC / Cover Butler
4956 W 6200 S, #312
Kearns, UT 84118
PIVOT BOTTOM MOUNT HYDRAULIC
PARTS LIST
DESCRIPTION
A. Under Mount Base Brackets
B. Bottom Pivot Arms
C. Support Crossbar Arms
D. Center Extension Tubes (Fluted
Ends)
E. Self Tapping Screws
F. Plastic Pivot
G. Black Plastics
H. Hex Bolts
I. Flat Washers
J. Nuts
K. Small Black Plastic Domes
Tools Needed: Power/Cordless Drill with
Phillips bit and tape measure.
OPERATION
OPENING your spa cover using the Fulcrum Style Lift:
1. Fold spa cover onto itself.
2. Lift Cover Lift by holding on to the Support Arm and lift spa cover to upright posi-
tion by leaning the Pivot Arm back till the spa cover behind the spa.
The Pivot Arm will stop when it contacts the ground.
CLOSING your spa cover using the Fulcrum Style Lift:
1. With the spa cover in the upright position, hold the on the Support Arm, and slowly
guide the cover and Cover Lift onto the spa shell. NEVER allow the spa cover to fall
onto the spa shell unassisted, as dame may accure
2. Unfold the spa cover off itself and engage the spa cover locks if available.
Revision 2/9/2024
CBF-1
LIFTER INSTRUCTIONS
QTY
2
2
2
2
15
4
4
2
4
2
15