Download Print this page
Shark DuoClean POWERFINS Performance Lift-Away ADV UV850 B Series Manual
Shark DuoClean POWERFINS Performance Lift-Away ADV UV850 B Series Manual

Shark DuoClean POWERFINS Performance Lift-Away ADV UV850 B Series Manual

Advertisement

Quick Links

IMPORTANT SAFETY INSTRUCTIONS
804106568
HOUSEHOLD USE ONLY
To reduce the risk of electric shock, this vacuum cleaner has a polarized
plug (one blade is wider than the other). As a safety feature, this plug will
fit into a polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a quali fied electr ician.
DO NOT force into outlet or try to modify to
fit.
A WARNING
TO REDUCE THE RISK OF FIRE, E L ECTRIC SHOCK OR INJURY:
GENERAL WARNINGS
When using an electrical appliance,
from electrical outlet. Remove all
basic precautions should always be
obstructions before you plug in
followed, including the following:
and turn on the unit again.
1.
Inspect power cord and plug
16. Keep nozzle and all vacuum
for any damage before use. DO
openings away from hair, face,
NOT use vacuum cleaner with a
fingers, uncovered feet, or
damaged cord or plug. Turn off
loose clothing.
all controls before plugging in or
17. DO NOT use if vacuum cleaner is
unplugging the vacuum cleaner.
not working as it should, or has
Store your vacuum cleaner with the
been dropped, damaged, left
power cord secured around the two
outdoors, or dropped into water.
cord hooks. To minimize the risk of
18. Use extra care when cleaning
power cord damage, do not allow
on stairs.
the motorized brush roll to ingest the
cord. If this occurs, immediately shut
19. DO NOT leave the vacuum cleaner
off power to the vacuum and remove
unattended while plugged in.
the cord.
20. When powered on, keep the
2.
Your vacuum cleaner may consist of
vacuum cleaner moving over the
a motorized nozzle, wand, hose, and/
carpet surface at all times to avoid
or vacuum pod. This device contains
damaging the carpet fibers.
electrical connections, electrical
21. DO NOT place vacuum cleaner
wiring, and moving parts that
on unstable surfaces such as chairs
potentially present risk to the user.
or tables.
3.
Use only identical replacement parts.
22. Your Shark
,s
vacuum may not
4. Carefully observe and follow
be designed to stand up on its own.
the instructions provided below
When taking a break from cleaning,
to avoid improper use of the
you may need to lean it against
appliance. DO NOT use the vacuum
furniture or a wall, or lay it flat
for any purpose other than those
on the floor. Using the vacuum
described in this manual.
for an application where the unit
5.
Before use, carefully inspect all
lacks stability may result in
parts for any damage. DO NOT
personal injury.
use if any parts are damaged.
23. DO NOT use to pick up:
6.
The use of an extension cord is
a) Liquids
NOT recommended.
b) Large objects
7.
This vacuum cleaner contains
Hard or sharp objects
c)
no serviceable parts.
(glass, nails, screws, or coins)
USE WARNINGS
d)
Large quantities of dust (drywall
dust, fireplace ash, or embers).
8.
This appliance can be used by
DO NOT use as an attachment to
persons with reduced physical,
power tools for dust collection.
sensory or mental capabilities or
lack of experience and knowledge
e) Smoking or burning objects
if they have been given supervision
(hot coals, cigarette butts,
or instruction concerning use of
or matches)
the appliance in a safe way and
f) Flammable or combustible
understand the hazards involved.
materials (lighter fluid, gasoline,
Cleaning and user maintenance shall
or kerosene)
not be made by children. Keep the
g) Toxic materials (chlorine bleach,
appliance and its cord out of reach of
ammonia, or drain cleaner)
children. DO NOT allow the appliance
to be used by children. DO NOT allow
24. DO NOT use in the following areas:
to be used as a toy. Close supervision
Poorly lit areas
a)
is necessary when used near children.
Wet or damp surfaces
b)
9.
Always turn off the vacuum cleaner
Outdoor areas
c)
before connecting or disconnecting
any motorized nozzles or other
Spaces that are enclosed and
d)
accessories.
may contain explosive or toxic
fumes or vapors (lighter fluid,
10. DO NOT handle plug or vacuum
gasoline, kerosene, paint,
cleaner with wet hands.
paint thinners, mothproofing
11. DO NOT use without filters in place.
substances, or flammable dust)
12. Only use
Shark•
branded filters
25. Turn off all controls before plugging
and accessories.
in or unplugging the vacuum.
13. DO NOT damage the power cord:
26. Unplug from electrical outlet
DO NOT pull or carry vacuum
a)
when not in use and before
cleaner by the cord or use the
any maintenance or cleaning.
cord as a handle.
27. Hand wash with water only.
b) DO NOT unplug by pulling
Washing with cleaning chemicals
on cord. Grasp the plug, not
could damage the unit.
the cord.
28. During cleaning or routine
DO NOT run the vacuum cleaner
c)
maintenance, DO NOT cut anything
over the power cord, close a
other than hair, fibers, or string
door on the cord, pull the cord
wrapped around the brushroll.
around sharp corners, or leave
29. Allow all filters to air-dry completely
the cord near heated surfaces.
before replacing in the vacuum to
prevent liquid from being drawn
14. DO NOT put any objects into nozzle
into electric parts.
or accessory openings. DO NOT use
with any opening blocked; keep free
30. Make sure the dust cup and all
of dust, lint, hair, and anything that
filters are in place after routine
may reduce airflow.
maintenance.
31. If provided, secure the power
15. DO NOT use if nozzle or accessory
cord around the two cord hooks
airflow is restricted. If the air
during storage.
paths or the motorized floor
nozzle become blocked, turn the
TECHNICAL SPECIFICATIONS
vacuum cleaner off and unplug
Voltage:
120V-, 60Hz
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Shark
PERFORMANCE
LIFT-AWAY"Eml
d u O clean POWERFINS' "
It's important to read this manual
prior to using your new product for the first time.
ASSEMBLY
2
(Click)
• • • .. • Tool Storage Posts •• •
NOTE: Your Quick Guide shows the accesso­
1.
Place
Pod
down onto
Nozzle.
ries that are included with your model.
2.
Insert
Wand
into
Pod.
3.
Insert
Handle
into wand.
* Accessories may vary depending on the
4.
At tach
Hose
to back of pod.
For proper operation, ensure all parts are
firmly clicked into place.
POWER CORD
For cord access, rotate upper hook down
Use cord holder on the side of wand to hold
and remove cord.
cord in place while vacuuming.
WHOLE-HOME CLEANING
SETTINGS
i
OOff
IN.nll'loo,
IICeri>M
-
•►
,_
. .
Select surface setting:
The Suction Control Slider located on the handle
allows you to adjust the suction depending on the
O Power Off
floor type.
I Hard Floor
MIN: to reduce suction and increase
For hard floors and small area rugs.
maneuverability on carpets.
II Carpet
I
I
MAX: to increase suction on hard floors.
For carpets.
NOTE: The brushrolls spin in all modes
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
Solld Red:
remove any blockages in the nozzle.
Flashing Green:
This vacuum will only function properly in temperatures ranging from 32
the vacuum off and adjust the room temperature. Once the temperature has reached the
operating range, turn the vacuum back on.
Flashing Red:
remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See Troubleshooting section for more information.
To engage
setting, step on floor nozzle and tilt handle
back firmly.
model.
Press the
the handle to detach it from the wand.
■\
I
.,.
Attach an optional cleaning accessory to
Suction
handle or wand.
i...
NOTE: All accessories are compatible with both the wand and the handle . Included accessories will vary by model.
MA<
I/
1/
. .
.
'-0=="1/
.
BRUSHROLL INDICATOR LIGH T
NOTE:
For deep carpet cleaning per ASTM F608,
use setting II (Carpet) with MAX suction.
INDICATOR LIGHT
The brush rolls are spinning and working as intended.
There is a jam in the brush roll area. Turn off and unplug the vacuum and
The vacuum is operating in an environment that is either too hot or too cold.
The motorized f loor nozzle is overheating. Turn off the vacuum, unplug it, and
WHOLE-HOME CLEANING
CLEANING MODES
UPRIGHT MODE
LIFT-AWAY MODE
Brushrolls,
select a s urface
Step on the pedal on the floor nozzle to lift
off the pod.
Handle Release
Wand Release
button and pull up on
Press the
the wand to detach it from the pod.
ACCESSORIES-WAND
NOTE: Your Quick Guide shows the accessories that are included with your model.
• Accessories may vary depending on the model.
°
F to 104
°
F. Turn
button and pull up on

Advertisement

loading
Need help?

Need help?

Do you have a question about the DuoClean POWERFINS Performance Lift-Away ADV UV850 B Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Shark DuoClean POWERFINS Performance Lift-Away ADV UV850 B Series

  • Page 1 CLEANING MODES potentially present risk to the user. or tables. Use only identical replacement parts. 22. Your Shark vacuum may not 4. Carefully observe and follow be designed to stand up on its own. the instructions provided below...
  • Page 2 HEPA filter and pull out the filter. To reinstall the door, align the t op first, then press in the bottom until it clicks into place. PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. Shark ® Performance Lift-Away ® ADV Upright Vacuum with DuoClean PowerFins'"...