Instruction manual Personal protection switch
Dear customer,
Thank you for purchasing this product.
The article has been finally tested and meets the requirements of
the applicable European and national directives. We hereby
confirm CE conformity, the corresponding declarations are on file
with us as the manufacturer.
In order to maintain the delivery condition of the product and to
ensure safe operation, you as the user must observe these
operating instructions. Therefore, please read the operating
instructions in full before using the product and observe all
operating and safety instructions!
Intended use
The portable residual current circuit-breaker with zero-voltage release is designed for use on building
sites and in the home and garden. It is simply plugged in between the mains supply and the load and
thus offers optimum protection against dangerously high body currents when live parts are touched.
Scope of delivery
•
Personal protection switch
•
Instruction manual
Typical application examples
Workshop
Drills, circular saws, soldering irons and stations, other electrical appliances
Household
Washing machines, dryers, dishwashers, irons, hair dryers, hood dryers, vacuum
cleaners, food processors, toasters, waffle irons, children's toys, model railroads,
metal floor lamps, water treatment plants,heating and much more.
Garden
Lawn mower, hedge trimmer, trimmer, saw, scarifier, garden pump, Sockets for
outdoor areas
Aquaristik
Lighting, heating elements, heat lamps, pump and filter system
Safety instructions
The safety instructions must be observed
The residual current circuit breaker is equipped with a test button. The function should be
checked before each commissioning and at regular intervals (at least once a week). If the
residual current circuit breaker does not switch off properly during this test, there is no
personal protection! The device must then be replaced immediately!
Damage caused by failure to observe these operating instructions will invalidate the warranty.
We accept no liability for consequential damage.
The electrical connection for versions with mains and/or supply cables for consumers on the
customer side may only be carried out by a qualified electrician with the appropriate electrical
knowledge.
The personal circuit breaker may only be used on a tested and earthed socket outlet.
For safety and approval reasons (CE), unauthorized conversion and/or modification of the product is
not permitted. Never disassemble the product.
The product is not suitable for children's hands. Children cannot assess the dangers of handling
electrical appliances. Therefore, take particular care in the absence of children.
The design of the product corresponds to protection class 1. Only a proper mains socket with a
protective earth conductor (230V~/50Hz) from the public supply network may be used as the voltage
source.
In commercial facilities, the accident prevention regulations of the German Federation of Industrial
Employers' Liability Insurance Associations for electrical systems and equipment must be observed.
Klinger & Born GmbH
T + 49 (0) 6161 - 9309 - 0
Schalten mit System
F + 49 (0) 6161 - 9309 - 10
In den Schlangenäckern 5
info@klibo.de
64395 Brensbach
www.klibo.de
Geschäftsführer:
Sitz: 64395 Brensbach
Dipl.-Wirt.-Ing. Peter Born
Amtsgericht Darmstadt
Volker Treusch
HRB 70527
Seite 1 von 4
Stand: 25.11.2024
Need help?
Do you have a question about the PRCD and is the answer not in the manual?
Questions and answers