Event Configuration - SMC Networks WIPCAM-PZ Manual

C.3. Event Configuration
Click Event > Setting to configure the FTP server or SMTP server, so that you can
upload images to FTP or send emails that include still images as notification.
FTP: Select the Enable FTP option to start the FTP service of the system. When
you enable the service, you have to complete the following settings.
- Host Address: Enter the IP address of the target FTP server.
- Port Number: Enter the port number used for the FTP server. The default
setting is port 21.
- User Name / Password: Enter the user name / password to login into the FTP
server.
SMTP: Select the Enable SMTP option to start the email service of the system.
When you enable the service, you have to complete the following settings.
- SMTP Server Address: Enter the mail server address. For example,
mymail.com.
- Sender Email Address: Enter the email address of the user who will send the
email. For example, John@mymail.com.
- Authentication Mode: Select "None" or "SMTP" according to the mail server
configuration.
- Password: Enter the password to login into the FTP server.
- Sender User Name: Enter the user name to login the mail server.
- Sender Password: Enter the password to login the mail server.
When completed, click "Save" and then select "OK". The system will automatically
start the Event Service. This system will send a notice to user by FTP or e-mail while
video streaming connection fails.
45