· Important Safety Notice 1. Please distinguish the transmitter and receiver before installation. 2. Do not disassemble the machine to repair the product during the working process to avoid electric shock. 3. Please cut off the power before installation. Live installation may damage the equipment.
Page 3
· Package Contents Transmitter unit x1pc Receiver unit x1pc DC5V/2A x1pc User manual x1pc Mounting brackets Screws · Installation Requirements...
Page 4
· Interfaces ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① Reset button Press to restart the device ② RJ45 signal output Output modulated HDMI signal. Connect the IR receiver extension cable to ③ IR in ensure that the remote control used is within the range of the IR receiving device.
Page 5
① ② ③ ④ ⑤ ⑥ ① Reset butto Press to restart the device ② RJ45 signal input Input modulated HDMI signal. Connect the IR receiver extension cable to ③ ensure that the remote control used is within the range of the IR receiving device. Connect the IR blaster extension cable, please keep the infrared transmitter as close as ④...
· Installation Procedures 1. Connection HDMI Display Network cable HDMI OUT V id e o S o u rc e HDMI Display IR IN Power IR OUT The network cable should follow the standard of IEEE-568B. It is recommended to select a network cable with less loss and crosstalk . 1-Orange/white 2-Orange 3-Green/white...
Page 7
2 ) Connect the CAT out port of the transmitter and the CAT in port of the receiver via a network cable (CAT6/CAT6A/CAT7). 3 ) If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter. 4 ) Plug the power supply into the device to get started.
Need help?
Do you have a question about the ALF-EXT60IR and is the answer not in the manual?
Questions and answers