Safety Notice - SMC Networks HPAV-ESW Manual

2 Safety Notice:

This device is intended for connection to the AC power line. For installation instructions, please refer to the
installation section of this guide. The following precautions should be taken when using this product.
Read all instructions before installing and operating this product.
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use
liquid cleaners or aerosol cleaners.
Do not operate this product near water.
This product should never be placed near or over a radiator or heat register.
Do not use an extension cord between the device and the AC power source.
Only a qualified technician should service this product. Opening or removing covers may result in
exposure to dangerous voltage points or other risks.
Do not plug the device into a power strip or surge protector because these devices may consist of
filter and impair signal.
Avoid plugging the device right next to noisy sources such as cell phone charger, Halogen light,
noisy desktop computer, vacuum cleaner, etc. otherwise it may result in poor transmission speed.
Unplug the device from the wall outlet and refer the product to qualified service personnel for the
following conditions:
If liquid has been spilled into the product
If the product has been exposed to rain or water
If the product does not operate normally when the operating instructions are followed
If the product shows a significant change in performance
7