Haas ML200 User Manual
  1. Manuals
  2. Brands
  3. Haas Manuals
  4. Measuring Instruments
  5. ML200
  6. User manual
Haas ML200 User Manual

Haas ML200 User Manual

Cassette deck
Hide thumbs

Advertisement

Table of Contents

Precision Digital Level User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ML200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Haas ML200

Summary of Contents for Haas ML200

  • Page 1 Precision Digital Level User Manual...
  • Page 2 This user manual is intended for use as a guide for initial setup, operational steps, trouble-shooting, and maintenance procedures. 1. Without external interference, the data transmission distance can reach up to 10 meters (approximately 32.8 feet). 2. For the most accurate results, it Is recommended to remove any debris on the base surface of the level, as well as the surface being tested prior to recording measurements.
  • Page 3 1.1 Product Descriptions & Technical Parameters of Level 2.2 Level and Terminal Connection 2.3 Set Bluetooth Serial Number 2.4 Set Terminal Brightness 2.6 Switching connection mode 2.7 Establish Level and Terminal Bluetooth Connection 5 Troubleshooting 6 Precautions 7 Level Maintenance 7.1 Terminal Maintenance 7.2 Storage Notes 7.3 Working &...
  • Page 4 1.1 Products Description & Technical Parameters of Level Technical Parameters of Level 1.6kg 0.00012 in/ft ±0.00024 in/ft ±0.006 in/ft 3x 1.5V AAA 4x4x3" 0.72 lbs 0.000573° ±0.001° ±0.029°...
  • Page 5 Assigned level number Unit ID 20024Q10001 Bluetooth Serial Number Tilt direction: the 3 phases of the arrow indicate the direction in which there is a higher level of inclination. Indicates the measuring surface is level: 0 in/ft ; 0 mm/m Indicates inclination direction is ≤...
  • Page 6 SD Card Slot Power Switch Terminal Case Technical Parameters of Handheld Terminal 150x77x22mm/ 0.25kg/0.11lbs 6x3x0.9" 1.4 List of product accessories (1) Type-C charging cable (1m) (2) AAA battery x6 (3) Right angled ruler (160x100mm) (4) Rust protection base cover (5) User manual (6) Certificate of conformity...

  • Page 7: Getting Started

    2.0 Getting Started 2.1 Battery Installation Turn the battery cover counter clockwise to access the battery cartridge. Insert 3 AAA batteries into their respective positive and negative directions and reinsert the cartridge to the battery slot. Place the battery cover back onto the battery slot and turn clockwise to lock in place.

  • Page 8: Terminal Connection

    2.2 Level and Terminal Connection 2.2.1 Turn on the level Blue light will indicate the level is powered on. Note: The level will automatically shut down within 1 minute of turning off the handheld terminal. For best conservation of battery, it is recommended to press the button located on the level to the off position.
  • Page 9 2.3 Set Bluetooth Serial Number Note: the number on the level LCD should match the number that was assigned in settings from 1-6. 2.4 Set Terminal Brightness...
  • Page 10 Press and hold time Pop-up keyboard Enter correct time and and date will appear date and confirm using the arrow key...
  • Page 11 If multiple level connections need to be established, this can be achieved by switching from Single Leveling mode to Network Leveling Mode in the settings menu. Once the mode is switched, it will remain the same until it is manually switched back. Note: When establishing connection for the first time, single leveling mode will be the default connection.
  • Page 12 2.7 Establish Level and Terminal Bluetooth Connection (Multi-Machine Mode) After selecting network leveling and inputting the serial number on the label of the level, restart the handheld terminal. Upon restarting, select the “Start searching” button to establish connection. Once the check marks are populated, Bluetooth connection is finalized and the “Completed”...
  • Page 13 3.1 Unit switching (Single-Machine Mode): Metric (mm/m), Degrees (°), or Inch (in/ft) 3.2 Data retention: Current measurement data can be saved. 3.3 Product Number: No. and corresponding data will match value on LCD of level.
  • Page 14 3.4.1 Single Machine mode (Single Leveling): Can display measurement data, digital bubble level visual, and provide leveling suggestions. Digital bubble level and leveling suggestions can be pressed to enhance size.
  • Page 15 3.4.2 Multi-Machine mode: up to four level measurements can be displayed at once. Digital bubble levels can be pressed to enhance size.
  • Page 17 In order to eliminate the thermal expansion error due to change in testing environment, it is recommended to calibrate the level prior to use. To begin calibration, select the “Calibrate” button in either Single-Machine mode or Multi-Machine mode. Follow prompts accordingly to complete the calibration procedure.
  • Page 18 Multi-Machine Calibration Steps When calibrating in Multi-Machine mode, the assigned product number correlating to the desired level must be selected before proceeding with calibration steps. Product number will not need to be selected in Single-Machine mode. After completing the calibration procedure, select the back button to return to measurement screen. If calibration is unsuccessful, repeat procedure until confirmation step is valid.

  • Page 19: Troubleshooting

    Troubleshooting Error Cause Solution Blank or dim LCD display Batteries installed Inspect battery placement incorrectly or low battery and correct misplacement or replace with new batteries Smart Level Display is frozen or Internal fault or low Remove batteries and flashing battery reinstall or replace if batteries are low...
  • Page 20 Precautions a. The level should be acclimated to testing environment prior to use and calibration. b. For high precision applications, the testing workpiece should be solid and minimal vibrations should be allowed. c. It is recommended to use the level in an environment with stable temperature for the most accurate results.
  • Page 21 7.2 Storage Notes a. Store in a dry place to avoid damage to electronic components due to moisture. b. Original case should be utilized when stored for a long period of time. c. It is not recommended to place the level in areas with extreme vibrations to avoid damage to internal components.

  • Page 22: Warranty Details

    8. Warranty Details Service Warranty Card Haas Tooling takes complete responsibility for the quality of the product, and provides 1-year warranty. This warranty covers defects in manufacturing materials only. The provisions of this warranty shall not apply to any product that has been misused, exposed to improper operating conditions, or been repaired or altered.

Table of Contents