TrailMax roof rack system. *The weight of your roof rack system will count towards the manufacturer's load limit. Do not modify any part of your TrailMax rack system. Do not install roof rack system onto previously modified roof.
103635 Installation 70° Position Use the measurement to position the brackets before fixing. Recovery Board measurements may vary depending on the brand. 890mm Use these slot lines to position part 002. Use this slots to fix te part 001.
Page 4
103635 Installation 20° Position Use the measurement to position the brackets before fixing. Recovery Board measurements may vary depending on the brand. 890mm Use these slot lines to position part 002. Use this slots to fix te part 001.
Page 5
103635 Installation Standar Position Use the measurement to position the brackets before fixing. Recovery Board measurements may vary depending on the brand. Use these slot lines to position part 001.
Page 6
Place the strap on part 001 following the reference. Insert the strap into the ratchet. Press down to lock the strap movement. The steps can be replicated at any position in the recovery board.
Need help?
Do you have a question about the 103635 and is the answer not in the manual?
Questions and answers