Sealey MAC12D Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Read the manual before using this product. Thoroughly understand operating procedures, safety warnings and maintenance
9
requirements. Keep the manual in a convenient place for all users to see and use. Keep labels as per original.
The compressor only operates with a 12-volt electrical system.
9
Consult your vehicle's manual or a qualified mechanic for proper connection procedure.
9
After 30 minutes of continuous operation, allow the unit to cool before restarting.
9
Damage can occur from continued overuse.
9
The compressor was permanently lubricated during assembly. DO NOT add oil or any other lubricant.
9
The unit will become HOT after using for a long period of time. When used for a long period of time, the compressed air hose and
9
device may become noticeably warm.
There is a risk of burn injuries! Allow the mini compressor to cool down sufficiently before storing.
9
Please use caution when touching the unit in order to avoid burns.
9
Only inflate tyres to the manufacturer's recommended pressure. DO NOT over inflate as serious injury could occur.
9
Keep the unit away from small children.
9
Clean with a damp cloth only. DO NOT use chemicals or soap.
9
DO NOT use the unit for pumping any gas or liquid other than air.
8
The unit is not designed for use as a source for breathable air.
9
The unit is designed for use with car tyres. It is not designed for use with large tyres like tractor or truck tyres.
9
DO NOT use (or modify) the tool for any other purpose than that for which it was designed.
8
Use extra caution when inflating small objects like bicycle tyres or sports balls.
9
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that
9
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product,
but must be supplied by the operator.
Failure to heed these warnings may result in fatal personal injury and/or property damage.
9
2. INTRODUCTION
Suitable for inflating tyres on cars, vans, 4x4s, motorcycles and bicycles with an auto stop feature. Backlit LCD digital display. 2835 SMD
LED worklight with strobe and SOS light. Supplied with 12V plug. The accessory kit includes a 700mm extension tube with Schrader
connection, Presta type adaptor, ball spike and inflatable adaptor.
3. SPECIFICATION
MODEL NO:
Input:
CFM:
Pressure Range:
Units:
Max Current:
Fuse:
Max Runtime:
© Jack Sealey Limited
12V TYRE INFLATOR WITH WORKLIGHT
MAC12D
MODEL NO:
MAC12D
12V DC
22 L/min
0-120psi
Psi, kPa, kg/cm² and bar
10A
10A
60 mins
Original Language Version
MAC12D Issue 4 18/06/24