SMC Networks 8606SX - annexe 2 User Manual page 102

U RMON
SING
The following example shows a filter
expression designed to capture any errors
occurring in AppleTalk packets. While the
other example shows filtering for decoded
details that is designed to capture any Ethernet
II packets directed to the IP address 10.1.0.23
that have the Don't Fragment flag set.
Configuring Channels
(or a group of combined filters) is referred to as a "channel." A channel can be based on a single
filter or on multiple filter expressions which are OR'ed together. The channel can be configured to
pass packets through if they match or fail to match the stated expression(s). Events can then be
defined to turn the channel on or off, or can also be triggered when the packets are accepted.
From the control table, click on
the Add (Edit) button to add (edit)
a channel entry. The dialog box
that opens is described in the
following table.
9-22
- The data and event stream formed by the packets that match the filter