The following table describes the fields of this screen.
Label
LAN IP
LAN Netmask
Enable Secondary IP
Secondary LAN IP
Secondary LAN Netmask
Enable DHCP Server
Start IP
End IP
< Back
Next >
If you finish the settings of this page, click Next, the screen appears as shown next.
SMC7904BRB3 User Manual
Fig 3.3.1 -5
Enter the IP address of your ROUTER in dotted decimal notation, for
example, 192.168.2.1 (factory default)
Enter the subnet mask of LAN IP.
Select this check box to enable the secondary LAN IP
Enter the secondary IP address of your ROUTER in dotted decimal
notation, for example, 192.168.100.1 (factory default)
Enter the subnet mask of the secondary LAN IP
Select this check box to enable the DHCP Server
This field specifies the first of the contiguous addresses in the IP address
pool.
This field specifies the last of the contiguous addresses in the IP address
pool.
Click < Back to return to the previous screen
Click Next > to go to the next screen
17
Description