Advertisement
Quick Links
Programming of your new remote :
1. Open the remote on the back to get access the DIP switches inside.
2. Set the DIP 6 switches into the appropriate position to your model.
Brand and model
CAME TOP432NA
FAAC XT2 433 SLH
MARANTEC D304-433
V2 PHOENIX CONT.50
http://www.remotecontrol-express.com
Programming Manual
HR MULTI 3
Original remote
- TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
Position of DIP switch
(black = switch)
Notes
Attention! :
After
step 3 there is a
special procedure for
FAAC remotes.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HR Matic HR MULTI 3
Summary of Contents for HR Matic HR MULTI 3
- Page 1 Programming Manual HR MULTI 3 Programming of your new remote : 1. Open the remote on the back to get access the DIP switches inside. 2. Set the DIP 6 switches into the appropriate position to your model. Brand and model...
- Page 2 Programming Manual DITEC GOL4 3. Place the new remote and pre-programmed remote Front to Front 4. Press and hold the button you want to program of the new remote. The LED of the new remote flashes once. 5. Press and hold the button on the already-programmed remote that you want to copy, the LED of the new remote flashes 3 times.
Need help?
Do you have a question about the HR MULTI 3 and is the answer not in the manual?
Questions and answers