Quick Setup - JDS Labs Element IV Operating Instructions Manual

S E C T I O N 1
Q U I C K S E T U P
S T EP 0 1
Connect AC power adapter to rear power jack
(16VAC), then connect to wall outlet.
S T EP 0 3
Connect headphones to the front headphone
output jack.
ST E P 0 5
Slowly raise the volume knob to an appropriate
listening level. See Listening Tips on page 7.
S T E P 0 2
Connect USB cable between your computer and
the USB jack.
S T E P 0 4
Pressing the Power button turns Element on or
off.
Pressing the Headphone/RCA button toggles
between headphone or RCA Output modes.
Pressing the volume knob toggles between USB
and Optical input.
Please see Connectivity and Computer Setup for
additional help.
J D S L A B S . C O M 2