JDS Labs EL AMP Operating Instructions Manual

O P E R A T I N G I N S T R U C T I O N S | A M P L I F I E R

E L A M P

S U P P O R T

O N L I N E

C O N T A C T @ J D S L A B S . C O M

J D S L A B S . C O M / S U P P O R T

B Y P H O N E

3 1 4 - 2 5 2 - 0 9 3 6

9 : 3 0 A M - 6 P M C S T ,

M O N D A Y T H R O U G H F R I D A Y

B Y M A I L

9 0 9 N B L U F F R D

C O L L I N S V I L L E , I L 6 2 2 3 4

U N I T E D S T A T E S

Table of Contents

Need help?

Do you have a question about the EL AMP and is the answer not in the manual?

Page 1 O P E R A T I N G I N S T R U C T I O N S | A M P L I F I E R E L A M P S U P P O R T O N L I N E B Y P H O N E B Y M A I L...
Page 2 S E C T I O N 1 Q U I C K S E T U P S T E P 0 1 S T E P 0 2 Connect AC power adapter to Connect a cable from your audio rear power jack (16VAC), then player to the RCA Input jacks.
Page 3 C O N F I G U R A T I O N C O N N E C T I V I T Y EL AMP accepts analog input via RCA jacks. RCA Line Output jacks are active while the amplifier is turned off, and automatically mute when the amplifier is turned on.
Page 4 L I N E - O U T F U N C T I O N A L I T Y E L A M P T U R N E D O N H E AD P H O NE AUD I O TO AMP L I F IE R HEA DPHONE S...
Page 5 O P E R A T I N G C A R E EL AMP uses a high current The Element can be safely powered on power supply and runs warm to the 24/7.
Page 6 T R O U B L E S H O O T I N G Amplifier does not turn on Cause: Missing or loose power adapter connection Solution: Firmly connect AC adapter to 16VAC power jack Internal LED flashes, then turns off Cause: Wrong power adapter detected Solution: See Power Adapters section below No sound in one channel...
Page 7 This equipment has been tested and found to Application for Council Directives 2004/108/EC, 2006/95/EC, 2002/95/ comply with the limits for a Class B digital device, EC.Conformity declared for EN55022:2011, EN611000-3-2, EN61000-3- pursuant to part 15 of the FCC Rules. 3, EN55024-2 J D S L A B S .