Installing Drivers On Windows Nt 4.0(Sp3) - PROLiNK Pixelview MVGA-NVTNT2A(Ultra) User Manual

Installing drivers on Windows NT 4.0 (SP3)
1. Start Windows NT, switch display properties to VGA mode (16 colors,
640x480 pixels), then restart your computer to make the change.
2. After your computer restarts, right-click the desktop and click 'Pr oper ties'.
3. Click the 'Settings'tab.
4. Select 'Display Type'.
5. Select 'Adapter Type' and click 'Change'.
6. Click 'Have Disk'.
7. Insert the AutoRun driver into the CD-ROM drive.
8. Click (assuming your CD-ROM disc driver X) 'Br owse CD' to select the
path 'X:\NVTNT2LU\NT4.0
9. You will see a list of NVTNT2 Series driver. Select NT4.0 driver and then
click 'OK'.
10. Windows NT will once again prompt for confirmation. All appropriate files
are then copied to the hard disk. When all files are copied, go back to the
'Display Pr oper ties' box by clicking 'Apply' or Click 'Close'.
11. The 'System Setting Change' dialog box is displayed. Click 'Yes' to
restart Windows.
12. Windows NT will restart with the default settings. The display applet will
appear to allow for mode selection.
'
of the display driver for Windows NT.
9