Related Manuals for Vulcan Fitness AeroMax VUL-BIK-MCH
Summary of Contents for Vulcan Fitness AeroMax VUL-BIK-MCH
- Page 1 VUL-BIK-MCH OWNER’S MANUAL VULCAN AeroMax Bike Machine Caution:Please read,understand and follow all instructions in this manual before using this equipment.
-
Page 2: Table Of Contents
CONTENT CONTENT………………………………….…..…………..P1 IMPORTANT SAFETY NOTICES……………..…………..P2 EXPLODED VIEW......…………………..……..P4 PARTS LIST....…........…..…P5 ASSEMBLY INSTRUCTIONS…..….......P6 INSTRUCTIONS FOR USE..………………..……..P9 MAINTENANCE……………………………………..….. P11 CONSOLE INSTRUCTIONS…………….…………..…... P12 - 1 -... -
Page 3: Important Safety Notices
IMPORTANT SAFETY NOTICES Safety first Regardless of how enthusiastic you may be about getting on your equipment and exercising, take the time to ensure that your safety is not jeopardized. A moment’s lack of attention can result in an accident, as can failure to observe certain simple safety precautions. 1. - Page 4 14. WARNING: Use the EQUIPMENT and start your training step by step, because injuries to health may result from incorrect or excessive training. 15. WARNING: It is important for keeping unsupervised children and pets away from the EQUIPMENT all the time in order to avoid injuring them. 16.
-
Page 5: Exploded View
EXPLODED VIEW - 4 -... -
Page 6: Parts List
PARTS LIST Description Description Main Frame Console Hex Recessed Flat Head Front Base Screw M10*25 Hex Recessed Round Head Rear Base Screw M6*25 Hex Recessed Flat Head Handlebar Support Screw 3/8”x3-1/5” Seat Adjustable Tube Spring Washer φ10 Handlebar Spring Washer φ6 Pressing Block Flat Washer φ10 Left Pedal... -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS Ⅰ. Notice of assembly * Please use floor padding, such as cardboard, to avoid scratching your floor during assembly. * The nuts and bolts have a little grease on them to protect them from corrosion. Please keep a rag handy to wipe your hands. - Page 8 STEP 1: Attach the Front and Rear Base (#2, #3) to Main Frame (#1) and secure with Hex Recessed Flat Head Screw M10*25 (#12-8pcs), Spring Washer φ10 (#15-8pcs) and Flat Washer φ10 (#17-8pcs). Fix Left and Right Pedal (#8, #9) to Crank (L&R). Note: Install the Pedal(L) by rotating it counterclockwise.
- Page 9 STEP 2: Insert the Handlebar Support Assembly (#4) into the support tube of Main Frame (#1) and lock it into proper position. First, remove the Pressing Block (#7) on the Handlebar Support Assembly (#4), then align the cylindrical pin on the Handlebar (#6) with the hole on the Handlebar Support (#4) and insert it (as shown in the small picture).
-
Page 10: Instructions For Use
INSTRUCTIONS FOR USE 1. Warm-up Using this Machine will provide you with several benefits. It will improve your physical fitness, tone your muscles and, in conjunction with a calorie-controlled diet, help lose your weight. The stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury. - Page 11 2. Resistance gear adjustment In the process of using the trainer, please refer to the gear scale, flip the resistance regulating disc to adjust the resistance, a total of 10 gears, 1 gear minimum, 10 gear maximum. 3. The adjustment mode of the bike is as follows: - 10 -...
-
Page 12: Maintenance Information
MAINTENANCE Maintenance Information 1. Lubrication of all moving parts is essential to the longevity and optimal performance of your Machine. Initial lubrication of some parts of your gym have been done at the factory, but the weight stack guide rods must be lubricated at the time of assembly. We recommend a clear aerosol, silicone or Teflon spray. -
Page 13: Console Instructions
CONSOLE INSTRUCTIONS - 12 -... - Page 14 - 13 -...
- Page 15 - 14 -...
- Page 16 - 15 -...
- Page 17 - 16 -...
- Page 18 - 17 -...
- Page 19 - 18 -...
Need help?
Do you have a question about the AeroMax VUL-BIK-MCH and is the answer not in the manual?
Questions and answers