Advertisement
Quick Links
The Zigbee switch NOUS D1Z (hereinafter referred to as the switch) is designed to organize automatic
and manual switching off of electrical appliances in the room, by remote access via the Internet, using
a smartphone or tablet with the Nous Smart Home application installed. Communication with the
switch is configured via a remote server using the P2P protocol, for which a wireless zigbee adapter is
used. The switch is equipped with a mechanical button and a light indication of the device status. The
device is equipped with an electromechanical relay.
NOTE:
other Tuya-compatible ZigBee gateway/hub to connect.
cannot be guaranteed in all cases, as it depends on many conditions: the quality of the
communication channel and intermediate network equipment, the make and model of the mobile
Read these instructions carefully.
Use the product within the temperature and humidity limits specified in the
technical data sheet.
Do not install the product near heat sources, such as radiators, etc.
Do not allow the device to fall or be subjected to mechanical stress.
Do not use chemically active or abrasive cleaning agents to clean the product. Use
a damp flannel cloth.
Do not overload the specified capacity. This may cause a short circuit and electric
shock.
Do not disassemble the product yourself - diagnostics and repair of the device
should only be carried out at a certified service center.
OPERATING MANUAL
description
You will need a Nous E1, Nous E7 or
device, the version of the operating system, etc.
PREVENTIVE MEASURES
Design and controls
The connection of a smart socket to the Internet
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for NOUS D1Z
Summary of Contents for NOUS D1Z
- Page 1 OPERATING MANUAL description The Zigbee switch NOUS D1Z (hereinafter referred to as the switch) is designed to organize automatic and manual switching off of electrical appliances in the room, by remote access via the Internet, using a smartphone or tablet with the Nous Smart Home application installed. Communication with the switch is configured via a remote server using the P2P protocol, for which a wireless zigbee adapter is...
-
Page 2: Installation
№ Name description A short press of the button switches the device "ON" "OFF". A Button long press of the button (5-7 C) resets the device settings and network connection parameters. Indicator Shows the current status of the device Installation Installation procedure:... - Page 3 Connection To connect the Nous D1Z device, you need a smartphone based on the Android or iOS mobile operating system with the Nous Smart Home application installed. This mobile application is free and available for download from the Play Market and App Store. The...
- Page 4 An auto-scan will appear, prompting you to add a new device. Confirm the connection and start pairing. If auto-scan doesn't see your device, you can select it manually from the device list In the "Add Manually" tab, select the "Smart Switches" category, and in it the "D1Z Smart Switch" model, as shown in the picture above;...
- Page 5 "NOUS Smart Home" in the search bar; In the search results, select NOUS Smart Home, then click Enable. Enter the username and password you previously registered (account supported only in the United States); When you see the correct page, it means that the Alexa account is linked to the NOUS Smart Home account.
- Page 6 “Echo (or Alexa), open my devices”. Echo will start to find devices added in NOUS Smart Home APP, it will take about 20 seconds to show the result. Or you can click “Open Devices” in Alexa APP, it will show the devices that have been found successfully.
Need help?
Do you have a question about the D1Z and is the answer not in the manual?
Questions and answers