NOUS B1T Operation Manual

NOTE:
support is limited. You must be willing to independently investigate
Detailed information on connection, changing settings and modifications is
presented on the website " https://tasmota.github.io/docs/ "
The NOUS B1T smart switch with Tasmota open software installed (hereinafter - the switch) is
designed to organize automatic and manual shutdown of electrical appliances in the room, through
remote access via a Wi-Fi network, using a smartphone or from a personal computer via the Web
interface. Communication with the switch is configured via a Wi-Fi network, for which a wireless Wi-Fi
adapter is used. The switch is equipped with a mechanical button and a light indicator of the device's
status. The device is equipped with an electromechanical relay and supports the Matter protocol .
ATTENTION:
cannot be guaranteed in all cases, as it depends on many conditions: the quality of the
communication channel and intermediate network equipment, the brand and model of the mobile
Read this manual carefully.
Use the product within the temperature and humidity limits specified in the
technical data sheet.
Do not install the product near heat sources such as radiators, etc.
Do not allow the device to fall and be subject to mechanical loads.
Do not use chemically active and abrasive detergents to clean the product. Use a
damp flannel cloth for this.
Do not overload the specified capacity. This may cause short circuit and electric
shock.
Do not disassemble the product yourself - diagnostics and repair of the device must
be carried out only in a certified service center.
Please contact the seller for a replacement if there is damage caused by shipping.
Please insert the plug into the outlet in proper condition and away from children.
OPERATION MANUAL
Tasmota is not a commercial product and
and resolve potential issues.
description
device, the version of the operating system, etc.
PRECAUTIONS
The connection of a smart socket with a Wi-Fi network
1