Related Manuals for InHand EC954
Summary of Contents for InHand EC954
- Page 1 InHand Networks Help Center EC954 Quick Start Guide_V1.0 Table of contents https://help.inhand.com/portal/en/kb/articles/ec954-1-en-14-7-2024...
- Page 2 Copyright Statement © 2024 InHand Network reserves all rights. Trademark The InHand logo is a registered trademark of InHand Network. All other trademarks or registered trademarks in this manual belong to their respective manufacturers. Disclaimers Our company reserves the right to make changes to this manual, and any subsequent changes to the product will not be notified separately.
-
Page 3: Packing List
1 Products EC954 is a high-performance multi-interface edge computer with AI scaling up to 26 TOPS AI arithmetic and supports TensorRT/cuDNN/VisionWorks/OpenCV AI framework. It is equipped with ARM Cortex- A55@2.0GHz Quad-core processor to provide a powerful computing platform. The product adopts the distribution version of Linux system, providing users with a flexible and diverse secondary development environment. -
Page 4: Rear Panel
3.2 Rear panel 4 Indicator Description The EC954 has 12 LEDs to indicate the power supply and system operating status. Name Definition Power indicator Power On and always on https://help.inhand.com/portal/en/kb/articles/ec954-1-en-14-7-2024... - Page 5 Default off, user programmable control 4G/5G Cellular network connection status indicator Always on after successful dialling cellular network signal strength See cellular network signal strength cellular network signal strength indicator description cellular network signal strength Cellular Network Signal Strength Indicator https://help.inhand.com/portal/en/kb/articles/ec954-1-en-14-7-2024...
-
Page 6: Din Rail Mounting
5.1 DIN rail mounting The mounting plate for the DIN rail is attached to the lower panel of the EC954 and is installed as follows: 1. Snap the top hook of the DIN rail mounting plate into the top of the DIN rail bracket. -
Page 7: Wall Mounting
Step 1: Secure the wall mounting kit to the lower panel of the EC954 using the screws Step 2: Once the wall mounting kit has been successfully fixed to the EC954, use the screws to fix the EC954 to the wall or cabinet. - Page 8 6 Connector Description 6.1 Ethernet Interface The EC954 has four RJ45 Ethernet ports that support 10M/100M/1000M adaptive rates.The RJ45 pins are described below: RJ45 Pin 10M/100M 1000M Number TRD(0)+ TRD(0)- TRD(1)+ TRD(2)+ TRD(2)- TRD(1)- TRD(3)+ https://help.inhand.com/portal/en/kb/articles/ec954-1-en-14-7-2024...
-
Page 9: Serial Ports
TRD(3)- 6.2 Serial ports EC954 supports 8 serial ports, the first 4 support RS-232 or RS-485 or RS-422 communication, the software can be configured, the last 4 are fixed to RS-485. The pinouts for the first four circuits are shown below:... -
Page 10: Digital Input Interface
Digital Input 2 Connector Isolation: 3000 VDC Digital Input 3 Connector 6.5 Digital Output Interface Interface identification Features descriptions DO ground terminal 4 digital outputs DO, DO, DO, DO, DO Isolated 3000VDC Digital Output 0 Connector Digital Output 1 Connector https://help.inhand.com/portal/en/kb/articles/ec954-1-en-14-7-2024... -
Page 11: Usb Interface
/media/usb*, the automatic uninstallation process will fail. If this happens, type umount /media/usb* to uninstall the device manually! 6.7 User Programmable Keys The EC954 provides an API interface that users can call to detect the state of programmable keys and then implement their own key logic. 6.8 DC input The EC954 supports 12 to 48 VDC power supply. -
Page 12: Microsd Card
EC954 supports 2 SIM card slots, SIM card needs to be installed in power off state. Remove the card removal pin in the accessory box and press the corresponding pin hole to remove the corresponding SIM card tray. Install the SIM card into the SIM card tray and press the tray back into the slot to complete the SIM card installation. - Page 13 6.12 mSATA Hard Drive Interface EC954 supports mSATA hard drive, factory default does not come with mSATA hard drive, if users have large capacity storage needs, they need to purchase their own mSATA hard drive, you can also consult with Imation for mSATA purchase.
- Page 14 Step 3: Reinstall the removed protective housing back into the EC954 7、Power supply and environmental requirements Input Voltage 12 to 48 VDC (two-pin terminal, V+, V-) Standby power: 120mA-200mA@12V power Operating power: 150mA-320mA@12V Peak power: 320mA@12V operating temperature -20-70°C (-4-158°F) Storage temperature -40-85°C (-40-185°F)
- Page 15 Step 1: Interconnect the PC and EC954 Insert one end of the cable into any of the EC954's network ports as shown in the figure below, and the other end into the computer's network port, and set the computer's IP address to the same network segment as the device interface address...
- Page 16 Take the ETH 2 plugged into EC954 at one end of the network port as an example, the login parameters are as follows: Login: https:https://192.168.4.100:9100 Initial login account: adm Initial login password: 123456 The following figure shows an example of using a WEB connection: Explanation：Not all EC954 models support the WEB interface management function, please refer to the...
Need help?
Do you have a question about the EC954 and is the answer not in the manual?
Questions and answers