E-Mu 1212M PCIE Manual page 35

Digital audio system
Table of Contents

Advertisement

Input Level
Settings
Optical
Input
Select
Mic Soft
Limiting
On/Off
• Inputs +4 or -10
• Outputs +4 or -10
• Optical Input Select
• Microphone Input
Soft Limiting
• Optical Output Select
• S/PDIF Output Format
E-MU PCIe Digital Audio Systems
Selects between Consumer level (-10dBV) or
Professional level (+4dBu) inputs.
(Use the -10dBV setting if your input is too weak.)
Selects between Consumer level (-10dBV) or
Professional level (+4dBu) outputs.
(The +4 dBu setting outputs a hotter level.)
Selects between ADAT or optical S/PDIF for the
MicroDock ADAT Input. The coaxial S/PDIF input is
disabled when S/PDIF optical is selected.
The Mic/Hi-Z inputs have built-in, analog "soft limiters"
which automatically turn down the gain before the
signal overloads the A/D converters. The soft limiters
allow you to record a hotter signal without fear of
clipping.
This control turns the soft limiters On or Off.
See "Making the Best Possible Recording"
information about the soft limiters.
Selects between ADAT or optical S/PDIF for the
MicroDock ADAT Output. The coaxial S/PDIF Output is
disabled when S/PDIF optical is selected.
Selects between S/PDIF or AES/EBU format for S/PDIF .
This sets the S/PDIF-AES status bit, but does not affect
the signal level.
4 - The PatchMix DSP Mixer
Output Level
Settings
Optical
Output
Select
S/PDIF
Output
Format
for additional
The Session
35

Advertisement

Table of Contents
loading

Table of Contents