Configuration - VDO MS 2010 Quick Start Manual

Hide thumbs Also See for MS 2010:
Table of Contents

Advertisement

Configuration

Press the on-off switch for about 3 seconds to
switch on the navigation system. The system
boots and the battery starts to charge.
The legal disclaimer screen appears. Tap OK
after reading the screen.
When you switch on the device for the first
time, you may have to select the desired lan-
guage for the navigation instructions.
Confirm your settings with OK.
As soon as the system is ready, the main menu
will appear on the screen.
Touchscreen The navigation system is equipped with a touchscreen. You can tap the
on-screen button with your finger. Avoid touching the screen with sharp or rough-
edged objects as these can damage the sensitive touchscreen display.
Main Menu
The following functions are available in the Main
Menu:
Destination
(page 32)
Tap the Destination button to select the destina-
tion if you want the navigation system to guide
you from your present location to a specific desti-
nation.
Home
Short cut. After you defined Home you can navi-
gate to this address, simply by tapping the Home
button in the main selection menu.
Work
Short cut. After you defined Work you can navigate to this address, simply by tapping the
Work button in the main selection menu.
Map Display
(page 28)
Tap the Map Display button if you want to view the navigation screen.
Settings
(page 28)
Tap the Settings button if you want to change basic settings e.g. language, volume,
brightness, unit of measurement (kilometres or miles).
Multimedia
(page 36)
Tap the Multimedia button to open the multimedia selection screen i.e. if you want to
play music or view images.
Configuration
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms 2110 traffic

Table of Contents