VDO MS 2000 Quick Start Manual page 12

Hide thumbs Also See for MS 2000:
Table of Contents

Advertisement

Once you have chosen the street, you will auto-
matically move on to the next screen where you
can select the house number.
Using the on-screen keyboard, type in the de-
sired house number, e.g. 14.
Tap the entry Karlstraße 14 to select it.
You have now selected all elements for the de-
sired destination.
The route will now be calculated and displayed
on the map.
Tapping this button (bottom right of screen) will open the list of previously used des-
tinations. To minimise the list, tap the button again.
Using the "backspace" button, you can delete incorrect entries (either whole terms or
individual letters).
By tapping the Map button, you can show the
destination point on the country/town map.
Tap the Calculate button.
The route will automatically be calculated and
displayed on the map.
As soon as the route has been calculated, you
can immediately start navigation. Simply tap
Navigation.
Beforehand, you can also switch to the route
list by tapping the Route button.
In the Route List you will see the individual
points en route, total route length, journey
time etc of the calculated route.
Tap the Navigation button.
You can now start driving and the navigation
system will guide you to your specified desti-
nation.
Tapping the wind rose will set the map to that it is facing north.
Exiting Navigation
To end the navigation, proceed as follows:
Tap the arrow symbol in the bottom right of the navigation screen.
The extended navigation functions appear.
Tap the End navigation button.
Navigation is stopped and you return to the main selection screen.
Navigation Mode
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms 2000xMs 2100 tmc

Table of Contents