Advertisement
Advertisement
Table of Contents
Related Manuals for APR Auto Pool Reel
Summary of Contents for APR Auto Pool Reel
- Page 1 ® MANUAL #1 - OPERATION AND SAFETY INFORMATION When installed, the Auto Pool Reel® operates with the switch in the "ON" position to cover and the "OFF" position to uncover the pool. Move the switch to the middle to stop the cover at any time.
- Page 2 NEVER TRY TO WALK ON YOUR POOL COVER NEVER OPERATE THE AUTO POOL REEL® IN HIGH WINDS DO NOT SUBMERGE ANY PART OF THE AUTO POOL REEL® FRAME IN THE POOL AUTO POOL REEL® WITH YOUR POOL COVER WILL NOT SUPPORT ANY WEIGHT AUTO POOL REEL®...
- Page 3 OPERATING THE AUTO POOL REEL Prior to operating the Auto Pool Reel® please ensure that Manual #2 and #3 have been read and implemented correctly. Failure to do so may result in malfunction and/or injury. When installed the Auto Pool Reel® operates with the switch in the "ON" position to cover and "OFF"...
-
Page 4: Led Lights
LED 3 = ON (Delay PCB is working) LED 2 = Off (no power to the APR or Switch is in neutral position or Switch is faulty and not working) LED 3 = Off (no power to the APR or Switch is in neutral position or Delay PCB is faulty and not working) When the Switch is in the "OFF"... -
Page 5: Power Controls
To put the pool cover onto the pool (unwind the reel), rotate the switch to “ON”. Ensure the Switch is rotated a 30° clockwise or to the right. The 3 LEDS will be illuminated indicating power to the APR and is supplied to all motors (the last LED will light up after a slight delay). -
Page 6: Maintenance
Auto Pool Reel® should be wiped down with a dry cloth and stored indoors. If the Auto Pool Reel® is stored in a shed or garage that is not heated a tarp should be placed over the A- Frames and Edge Guide Arms separate from the pool cover. This ensures that any moisture that is on the pool cover will not be exposed to the A-Frames and Edge Guide motors. -
Page 7: Frequently Asked Questions
Position the Auto Pool Reel® System edge guides over the pool edge assembly be to the edge of the pool? (4 to 6 inches). The Auto Pool Reel® should also be secured to the pool deck. 12. Do I have to remove leaves from the cover No. -
Page 8: Troubleshooting Guide
See Manual #3 - Assembly and Installation Step 13: Attaching Pool Cover to the Tube Assembly. 9. The top LED is not lit up and the APR is not This indicates there is no power to the unit. Please check to working when I rotate the switch to the "ON"... - Page 9 NEVER TRY TO WALK ON YOUR POOL COVER NEVER OPERATE THE AUTO POOL REEL® IN HIGH WINDS DO NOT SUBMERGE ANY PART OF THE AUTO POOL REEL® FRAME IN THE POOL AUTO POOL REEL® WITH YOUR POOL COVER WILL NOT SUPPORT ANY WEIGHT AUTO POOL REEL®...
Need help?
Do you have a question about the Auto Pool Reel and is the answer not in the manual?
Questions and answers