Cobra SC 200D Manual

Also See for SC 200D:

Table of Contents

Installation

Features Overview - Part 1

Features Overview - Part 2

Connect Cabin Camera to the Video Input Port on the SC 200
For Cabin View
* optional accessory sold separately.

Connect Extension Cable to the Video Input Port on the Dash Cam
Connect Extension Cable to the Rear Camera
Attach Rear Camera to the Vehicle's Back Window

Please position the camera on the rear windshield so it faces out of the vehicle in the orientation shown

SC200 will respond to certain voice commands so you can stay focused on the road ahead. Try the following voice commands.

Say	Camera Action
"Front Video On"	Front-View camera is displayed on screen
"Rear Video On"	Rear-View camera is displayed on screen (optional accessory camera required)
"Record Video"	Begins loop-recording
"Lock Video"	(If currently recording), Camera locks the video and tags as Favorite
"Lock Video"	(If not currently recording), Camera begins emergency recording, locks first video and tags as favorite
"Screen On"	Turn Display On
"Screen Off"	Turn Display Off
"Take Photo"	Takes photo of front and/or rear view and saves to "Photos" folder

Recording Stopped:

	Settings Button: Access the dash cam's Settings menu.
	Takes a snapshot and stores it in the Photo Folder.
	Enters the playback menu to review previous recordings and photos.
	Begins loop recording.

While Recording:

	When pressed the camera saves the current clip from being overwritten.
	Takes a snapshot and stores it in the Photo Folder.
	Toggles the microphone on/off. Note that the icon on the button indicates the action that will be taken when the button is pushed, not the current setting. The current setting is shown on the status bar at the top of the screen.
	Stops loop recording. While in an Emergency Recording you will be asked to confirm.