Contixo Flip Racer SC3 Manual
Also See for Flip Racer SC3:

Advertisement

Contixo Flip Racer SC3 Manual

WHAT'S IN THE BOX

INTRODUCTION AND OVERVIEW

Contixo Flip Racer SC3 RC Stunt Car. This is a super fast rear wheel drive ip stunt car with 2.4Ghz remote control. The SC3 is a double sided 360° rotating RC Car with very bright and intense LED lights in the wheels that illuminate in multi-colors. Equipped with a programmable remote and wrist band for easy access.
Features

REMOTE CONTROL OPERATION

REMOTE CONTROL OPERATION

SINGLE BUTTON MOVEMENT

  • Button 5 Move Forward
  • Button 6 Move Backward
  • Button 7 Flip/Spin Left
  • Button 8 Flip/Spin Right

DUAL BUTTON MOVEMENT REPEATEDLY

  • Buttons 5 & 7 moves forward and ips left
  • Buttons 6 & 8 moves forward and ips right

NOTE: SC3 body needs to be right side up. If the body is with the battery compartment facing up the SC3 will respond opposite meaning every action in reverse.

TO PROGRAM YOUR FLIP RACER
Buttons 1, 2, 3, 4 are PROGRAM action buttons. Press actions buttons 1, 2, 3, 4 upto 6 times each for one single program.
Action Buttons:

  1. Left Flip
  2. Forward
  3. Right Flip
  4. Backward

Center - PROGRAM Button

Example 1: Press 2 once and PROG once. The SC3 will move forward a short distance. Press PROG again and it will repeat.
Example 2: Press 2 twice and PROG once. The SC3 will move forward a longer distance. Press PROG again and it will repeat.
Example 3: Press 2 once, 3 once and PROG. The SC3 will move forward and ip right once. Press PROG again and it will repeat.
Example 4: Press 2 once, 1 once and PROG. The SC3 will move forward and ip left once. Press PROG again and it will repeat.
Example 5: Press 2 once, 4 once and PROG. The SC3 will move forward and backward. Press PROG again and it will repeat.
The more times (Upto 5 times) you press action buttons the farther it goes and the more it ips and spins.

BATTERY CHARGING

  1. Plug your battery in your computer USB port or a USB plug.
  2. The charging light will come on when charging and turns o when charging is complete (40 Minutes).
  3. Unscrew battery compartment and plug it into the SC3.
  4. Charing time is 40 minutes. Run time is 20 minutes.
  5. Battery Size 3.7V 300MAH Pre-Installed in car UNPLUGGED (Must be plugged in).
  6. Remote control (2 x AAA batteries (NOT included)

CONTACT INFORMATION
Designed by Contixo, California USA • Assembled in China
Website: www.contixo.com
Email: sailes@contixo.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Contixo Flip Racer SC3 Manual

Advertisement

Need help?

Need help?

Do you have a question about the Flip Racer SC3 and is the answer not in the manual?

Questions and answers

Table of Contents