Page 1
IntelliPup R4 User Manual *product colors may vary PLEASE READ THIS MANUAL BEFORE USING. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE...
Page 2
How to use Voice Control Maintain direct line of sight between remote transmitter light and Intellipup. Speak toward the microphone from no more than 12 inches away. Voice Command Button 1. Press the Voice command button 2. Aim the remote at IntelliPup’s head and speak into the microphone on the remote control (COMMANDS ON PAGE 5) 3.
Replace the battery cover and screw back into place. *When removing the battery to charge, take care to unclasp the connector before pulling it off. Remote Battery Installation Remote for Contixo Rechargeable USB Charging IntelliPup R4 IntelliPup R4 Battery Cable...
Remote Control Signal Transmitter Signal Indicator Light Voice Command Microphone...
Page 5
Turn On/Off: Slide the power Switch on the IntelliPup R4 Standby: Occurs after 30 seconds without operation. IntelliPup R4 will turn off after 90 seconds without operation Directional: Press and hold the Forward, Backward, Turn Left, and Turn Right buttons.
How to Play with IntelliPup R4 continued Other Actions Imitate Tease the Dog Guard Dance IntelliPup will play music and dance. Programming Create your own set of actions! To Use the programming feature: Stop Touch mode IntelliPup will act cute when touching the top of the head.
Common Problem Solution Nothing happens when IntelliPup is turned The remote control doesn’t work IntelliPup doesn’t work with remote immediately. charging light turns on cable. cable Recommend using a 5V 1A charger (Not included) for charging. Low Power Indications...
Need help?
Do you have a question about the IntelliPup R4 and is the answer not in the manual?
Questions and answers