VDO CIX 3000 BLUE Manual page 14

OPERATING INSTRUCTIONS
Redial
Press and hold down the p button on the remote control to redial the last number
dialled.
Switching between private and hands-free modes
During a call:
Press the m button on the remote control to switch between hands-free and private
(loudspeaker off) modes.
In private mode, you can continue the call directly with the mobile phone.
Setting the call volume
During a call:
Press the V or W button on the remote control to set the call volume.
Setting the ring volume
Whilst the phone is ringing:
Press the V or W button on the remote control to set the ringer volume.
Making and receiving calls with the headset profile
The Bluetooth headset profile was developed specifically for the use of headsets in
conjunction with a mobile phone. In comparison with the hands-free profile, it provides
restricted options for echo and noise suppression.
If your mobile phone does not support the hands-free profile, you must set the headset
profile as described.
The following functions are supported by the CIX 3000 Blue when the headset profile is
activated (depends in part on the mobile phone):
Button Function
p
Multi-function button (depending on the mobile phone and operating mode):
Accept call, reject call, initiate speech recognition, switch between hands-free
and private
H
As hands-free profile
V
As hands-free profile
W
As hands-free profile
O
As hands-free profile
m
No function
v
No function
For more information about the specific functions of your mobile phone when the headset
profile is activated, please refer to the operating instructions for your phone or visit our
website at www.vdodayton.com.
14