Coast FL19 Manual

Table of Contents

Contents

1 USING THE PRODUCT
2 AIMING THE BEAM
3 POWERING THE DEVICE
4 GO RECHARGEABLE
5 CAUTION
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Coast FL19 Manual

USING THE PRODUCT

The FL19 was designed with COAST's Wide Angle Flood Beam Optic utilizing a four-setting lighting sequence. Use the power button to cycle through the white LED's Medium, High and Low brightness settings, as well as the night-vision-saving Red Mode.
PRODUCT OVERVIEW - Part 1
PRODUCT OVERVIEW - Part 2

	WIDE ANGLE BEAM + RED
	ULTRA VIEW FLOOD
	POWER BUTTON
	HINGED BEAM ADJUSTMENT
	REFLECTIVE HEADSTRAP
	3 X AAA ALKALINE BATTERIES (INCLUDED)
	ZITHION-X RECHARGEABLE BATTERY (NOT INCLUDED)

AIMING THE BEAM

The FL19 is attached to the headstrap via an adjustable hinged beam bracket for a precisely pointed beam. To adjust the aim of the beam, grasp the bezel of the headlamp and tilt it until the beam is aimed in the desired direction.

POWERING THE DEVICE

The FL19 is powered by three COAST Extreme Performance AAA alkaline batteries (included). To change the batteries, lift the clasp on the top of the headlamp and open the battery compartment. Remove all three batteries, discard, and install three new AAA alkaline batteries. Be sure the batteries are correctly oriented before closing the battery compartment.

GO RECHARGEABLE

Designed with COAST's Dual Power Technology, the FL19 can also be powered by a COAST ZITHION-X Rechargeable Battery (sold separately). To go rechargeable, replace all three AAA alkaline batteries with one COAST ZITHION-X Rechargeable Battery.