POLTI VAPORETTO, SV660 / SV650 / SV620 / SV610 STYLE Troubleshooting Manual
Also See for VAPORETTO:
- Manual (18 pages) ,
- Instruction manual (16 pages) ,
- User manual (14 pages)
Advertisement
Table of Contents
Contents
-
1
Troubleshooting
- 1.1 The appliance does not turn on
- 1.2 No steam is coming out
- 1.3 In steam mop setting the appliance doesn't work
- 1.4 The appliance releases too much water on the floor
- 1.5 The metallic tube cannot be pulled out
- 1.6 Polti Frescovapor deodoriser is not released when using steam
- 1.7 Steam too damp using Polti Frescovapor
- 2 Documents / Resources
POLTI VAPORETTO, SV660 / SV650 / SV620 / SV610 STYLE Troubleshooting Manual
Troubleshooting
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
The appliance does not turn on | No power. | Check that the appliance has been connected to the mains. |
No steam is coming out | Boiler out of water. | Disconnect the appliance from the mains, fill the water tank and wait about 15 seconds, after which use the appliance. |
| Appliance turned off. | Check that the appliance has been connected to the mains. | |
In steam mop setting the appliance doesn't work | The metal tube is not properly inserted. | Insert the metal tube into the rectangular opening until you hear the coupling "click". |
The appliance releases too much water on the floor | Steam output control set to the maximum. | Reduce the quantity of steam to the minimum. If necessary, momentarily stop the disbursement of steam, while continuing to rub the surface. |
The metallic tube cannot be pulled out | The power cord not unwound. | Check that the power cord has been unwound from the special cord-winder hooks. |
Polti Frescovapor deodoriser is not released when using steam(only for Polti Vaporetto SV660/650/620_STYLE models) | Deodorant selector in OFF position. | Push the selector. |
| Deo Dispenser door open. | Carefully close the Deo Dispenser door. | |
| Check the Polti Frescovapor level. | Fill the dispenser with Polti Frescovapor. | |
Steam too damp using Polti Frescovapor(only for Polti Vaporetto SV660/650/620_STYLE models) | The steam is mixing with Polti Frescovapor. | Stop the Polti Frescovapor supply as desired to reduce the humidity of the steam. |
| If problems persist or are not listed above, please contact a Polti Authorised Service Centre (see www.polti.com for the updated list) or contact Customer Services. | ||
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download POLTI VAPORETTO, SV660 / SV650 / SV620 / SV610 STYLE Troubleshooting Manual
Advertisement
Need help?
Do you have a question about the VAPORETTO and is the answer not in the manual?
Questions and answers