Assembly Steps Step 1 Step 2 Step 3 Step 4 In order to activate the gas hydraulic,it is important that once you have assembled the stool that you raise the lever and bounce your weight up and down on the stool and then lift your weight off with the lever still raised and the stool should begin to rise.
Page 5
MATERIAL CARE INSTRUCTIONS Fabric Clean regularly with a vacuum cleaner. Do not use any solvent containing a cleaning agent. Remove spilled liquids immediately in the direction of seam to seam. Use distilled/purified water to avoid chalk stains. Glass Clean with a glass cleaner. Never use abrasive detergents. Use table mats on the surface to avoid scratches from forming.
Need help?
Do you have a question about the Seville Barstool and is the answer not in the manual?
Questions and answers