Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for STOKK T1 Lite Series
Summary of Contents for STOKK T1 Lite Series
- Page 1 Reverse Osmosis Water Filtration System T1 Lite Series...
-
Page 2: Table Of Contents
CONTENT PREPARATION BEFORE FIRST USE OPERATION CARE & MAINTENANCE TROUBLESHOOTING WARRANTY... -
Page 3: Preparation
PREPARATION The following instructions must be followed when using the product to prevent injury and property damage. Any incorrect operation due to disregard of instructions may cause harm or damage. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 4: Product Specifications
In order to run the When not in use for an machine longevity, regularly machine smoothly, use extended period, shut off clean and replace the filters. Stokk filters and the water source and power accessories. supply and store the machine properly. PRODUCT SPECIFICATIONS... -
Page 5: Package Contents
PACKAGE CONTENTS RO Water Filtration System x 1 Drip Tray x 1 High Borosilicate Glass Carafe x 1 Mineral Filter x 1 User Manual x 1 FILTER SPECIFICATIONS Filter Name Filter Function Service life Model: RT1 Lite-PPC 0.5 Micrometers. Captures large particles and visible impurities in the water, and deeply absorbs such as Polypropylene Carbon 6-12 months... -
Page 6: System Features
SYSTEM FEATURES 0.27 0.85 Pure Water (3.2L) Tap Water Tank Mineral Water Note Before starting use, please remove the activated Before starting use, please remove the activated carbon pouch from the Tap Water Tank. carbon pouch from the Tap Water Tank. PARTS DESCRIPTION Water Purifier Cover (Water Tank... - Page 7 Faucet Press「 」to start or stop dispensing water. Full Pot Press「 」to dispense water in full bottle for glass carafe. Half Pot Press「 」to dispense water in half bottle for glass carafe. Flush Press「 」to flush the RO filter for 30 seconds. Long press to enter the program of flushing the RO system and press any button to exit.
-
Page 8: Before First Use
BEFORE FIRST USE FLUSH THE RO SYSTEM If you are commissioning the system for the first time or have just replaced the filter cartridges, please follow the steps below 5-6 TIMES to ensure that the system gets adequately flushed before using. Step 1 Always start the system flushing with a new tank of the potable (tap) - Page 9 Step 5 Empty the internal pure water reservoir to flush - Long press the「 」 button, the pure water will start to flow from the outlet until the internal reservoir is empty. Step 6 The system will continue to filter when the internal pure water reservoir is empty.
-
Page 10: Water Dispensing
OPERATION WATER DISPENSING Alkaline Mineral Boost Carafe Before first use, remove the mineral filter, shake it a few times, soak Note it for 5 minutes, and then flush it with a carafe of water to activate the mineral filter. Place the provided glass carafe with mineral filter on the drip tray. Press「... - Page 11 Place a regular water cup on the drip tray. Press「 」to start and stop dispensing at any time. The PPM number displayed on the control panel represents the Note TDS (Total Dissolved Solids) value of the filtered water. Water with a TDS value below 50 ppm is safe for drinking.
-
Page 12: Filter Replacement
FLUSHING SYSTEM Auto Flushing The water purifier will automatically flush after power supply, water change, or completion of water filtration. Manual Flushing Press 「 」to flush the RO filter for 30 seconds. If not in use for an extended period, please flush the machine over 2-3 times following steps of Flushing System. - Page 13 Step 3. To replace the PPC or RO filter a. Lift the latch upwards to release the filter. b. Remove the original PPC or RO filter. c. Insert the new replacement filter into the circular port and push it into the correct position.
- Page 14 Step 4. Refill and replace the tap water tank and recover the water purifier cover. Step 5. Reset the filters. a. Plug in the power and long press「 」at least 5 seconds to enter the Filter Reset Program. b. Short press「 」to switch among “PPC-RO- C-”...
-
Page 15: Care & Maintenance
CARE & MAINTENANCE WARNING: Unplug the water purifier before cleaning. SYSTEM MAINTENANCE If you won't be using the system for more than a week, follow these steps: ·Before shutting down, drain the internal pure water tank and tap water tank. ·Store the system on a dry, secure surface away from direct sunlight in a room with ambient temperature. - Page 16 ·Fill the tap water tank with the descaling solution, place it back to the base and plug in. ·Press the 「 」 until one beep to enter manual flushing. The machine will flush for 30 seconds and stop. Repeat the manual flushing 5 times. ·Unplug the power and let it stand for 2 hours.
-
Page 17: Troubleshooting
·Electrical control error ·Unplug and re-plug the machine to ·Built-in TDS tester failure reset. ·Contact customer service at Contact Stokk customer service The machine is ·Pure water shortage ·Wait for water purification to complete. not dispensing ·The water production system has ·Remove and reinstall the RO filter. -
Page 18: Faq
Q: What is an RO water purifier, and how does it work? A: The core component of a reverse osmosis water purifier is the RO membrane. It's a highly precise filter with a porosity of 0.0001 μm. Under pressure from the pump, the RO membrane allows water molecules to pass through while blocking dissolved salts (like sodium, potassium), heavy metal ions (such as lead, arsenic, mercury), and organic compounds. - Page 19 A:RO water is generally safe to drink. While the process does remove some minerals, water is not the primary source of minerals in our diet; most essential minerals are obtained from food. Additionally, Stokk RO systems include mineralization stages to reintroduce beneficial minerals back into the water.
-
Page 20: Warranty
WARRANTY TERMS & POLICY We warrant the highest quality in material, craftsmanship, and service for all our products, effective from the date of purchase throughout the warranty period. Defective products due to manufacturer flaws will be replaced based on eligibility. Refunds are available within the first 30 days of purchase and are applicable only to the original purchaser. - Page 21 EXTEND WARRANTY Please scan the QR code below for extra 1 YEAR WARRANTY registration. The filters are considered consumable items, so they Note do not fall within the coverage of our warranty. We truly appreciate your understanding on this matter.
Need help?
Do you have a question about the T1 Lite Series and is the answer not in the manual?
Questions and answers