Connecting the Element 5 Hub
to your computer
The Element 5 Hub features a reversible design, allowing you to place the device
on either side of your laptop for optimal port placement.
Choose which side of your laptop you would like to use, ip the Element 5 Hub if
required, and follow the steps as below.
Connect the AC power cord to your wall outlet, and connect the other end
1
of the power cord (IEC320-C5) into the Element 5 Hub's power supply.
2
Connect the barrel connector to the [ DC in: ] port on the Element 5 Hub.
Need help?
Do you have a question about the Element5 and is the answer not in the manual?