Dr.Dabber Switch2 Instruction Manual

On/O :
Slide the switch to the right to turn on.
Switch has a 15 minute auto shut-o feature. Press any bu on to wake from sleep mode.
The 3 LEDs on the back of the device indicate ba ery level. Pulsing lights indicate.
less than 10% remaining.
APP Connection - iOS:
Download the Lablink Browser from www.lablinkbrowser.com
Copy the following link and paste it into the LabLink browser to access the web app:
h ps://drdabber.app/
Switch must be powered on and nearby. Press "Launch" then select your device from the list. Perform any necessary firmware updates.
APP Connection - Android:
Copy the following link and paste it into the Google Chrome browser to access the web app:
h ps://drdabber.app/
Switch must be powered on and nearby. Press "Launch" then select your device from the list. Perform any necessary firmware updates.
Change Temperature Se ing:
+ bu on
Press the to increase temperature, and
the - bu on to decrease temperature. The LEDs
will change colors to indicate the selected
temperature se ing.
Activate Heating Cycle:
Press the "d" bu on ( ) once to activate. The LEDs will pulse Red to indicate heating and Green when the Switch2
reaches desired temperature.
Heating cycle can be cancelled at any time by pressing the bu on again.
3 flashes from the LED band indicate a low ba ery.
Charging:
To charge, plug the charging cable into the device. The device can be used while charging. LEDs will pulse
White while charging and turn solid when fully charged.
INSTRUCTION MANUAL
Charging LEDs
Se ing Default Temperature (°F)
Se ing 1
Se ing 2
Se ing 3
Se ing 4
Se ing 5
=
The Default and Our Recommended Se ing
USB-C Charging Power Switch
LED
400 Purple
440 Blue
480 Cyan
500 Orange
540 White