ENGLISH Read these instructions for use carefully and keep them for later use. Make them accessible to other users and note the information they contain. 2. SIGNS AND SYMBOLS Contents The following symbols are used on the device, in 1. Included in delivery ..........4 these instructions for use, on the packaging and 2.
• If the device does not work properly, or you Separate the product and packaging feel unwell or experience pain, stop using it elements and dispose of them in immediately. accordance with local regulations. • Do not position your face too close to the mask, otherwise the hot steam could cause 3.
• If the mains connection cable of this device PROTECTION is damaged, it must be replaced by the man- • The device has a protection fuse. This may ufacturer, its customer service department or only be replaced by authorised specialist per- a similarly qualified person to avoid any risks.
Prior to initial use Suction tube Nozzle Important Facial sauna mask • Remove all packaging material before using the device. • Protect the device against dust, dirt and hu- 6. INITIAL USE midity and never cover the device while it is in use.
9. Push the variable steam regulator down to 2 to 3 treatments are performed per week As soon produce smaller steam particles, and push it as the production of steam starts to diminish (max- up for larger ones. imum duration approx. 10 minutes), turn the ON/ OFF switch to the “OFF”...
agent. Clean these parts thoroughly and allow • Place the mask into boiling water for 5 minutes. them to dry completely. Residual moisture or • Then dry the mask carefully using a soft cloth. wetness represents an increased risk of bacte- •...
Need help?
Do you have a question about the SI 40 and is the answer not in the manual?
Questions and answers