The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting
0
Touch the
symbol repeatedly until the
1.
indicator lights up.
‹‹
Set the desired time in the settings area.
2.
After a few seconds, the time begins to elapse.
Changing or deleting the time
0
Touch the
symbol repeatedly until the
lights up.
Change the time in the settings area or set
to delete the programmed time.
When the time has elapsed
An audible signal sounds.
display and the
V
indicator lights up. The displays go
out after 10 seconds.
0
When the
symbol is touched, the displays go out
and the audible signal ceases.
V
lights up on the timer display.
V
indicator
‹‹
in order
‹‹
appears on the timer
vPowerBoost function
T he PowerBoost function enables you to heat up large
P o w e r B o o s t f u n c t i o n
quantities of water faster than when using heat setting
Š
.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
the display for the selected hotplate; the
will then be set automatically without activating the
function.
Note:
In the Combi zone, the PowerBoost function can
only be activated if the two cooking zones are used
independently of each other.
Activating
Select a hotplate.
1.
Š
Select the
heat setting and then touch the boost
2.
symbol. The
›
indicator lights up.
The function was activated.
Deactivation
Select the hotplate.
1.
Touch the boost
G
symbol.
2.
›
goes out on the display and the hotplate switches
Š
back to the
heat setting.
The function is deactivated.
Note:
In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
PowerBoost function
›
Š
and
will flash in
Š
heat setting
en
G
19
Need help?
Do you have a question about the PVQ711F15E and is the answer not in the manual?
Questions and answers