Lumag HB-8N Original Operating Instructions
  1. Manuals
  2. Brands
  3. Lumag Manuals
  4. Media Converter
  5. HB-8N
  6. Original operating instructions
Lumag HB-8N Original Operating Instructions

Lumag HB-8N Original Operating Instructions

Hydraulic wood splitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Translated from German to English - www.onlinedoctranslator.com
HYDRAULIC WOOD SPLITTER
original operating instructions
HB-8N
IMPORTANT NOTE!
Wood splitters with 8t splitting force are mainly used in private areas. For ecological reasons,
always place the hydraulic wood splitter on a solid, dense surface to prevent contamination of
the surface.
ATTENTION! The machine is delivered without engine oil and without fuel!
ATTENTION! The vent screw on the oil filler neck must always be unscrewed before the machine
is put into operation. This allows the hydraulic tank to be ventilated.
Both the model number and the serial number can be found on the rating plate on the machine. You
should keep both numbers in a safe place for future reference. This manual explains the functions
and uses of the machine.
FOR YOUR SAFETY
Before commissioning, read the operating instructions, safety and
Warnings must be observed!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HB-8N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lumag HB-8N

Summary of Contents for Lumag HB-8N

  • Page 1 Translated from German to English - www.onlinedoctranslator.com HYDRAULIC WOOD SPLITTER original operating instructions HB-8N IMPORTANT NOTE! Wood splitters with 8t splitting force are mainly used in private areas. For ecological reasons, always place the hydraulic wood splitter on a solid, dense surface to prevent contamination of the surface.
  • Page 2 22nd 11.1 Safety instructions for transport warranty/guarantee/customer service 10.2 Transport and storage 23rd EC declaration of conformity 12th setup 24th HB-8N components 13th hydraulics 14th drive types 14.1 Gasoline engine 14.2 Refueling 14.2.1 Filling engine oil 14.2.2 Refueling 14.2.3 Storing fuel 14.3 Starting the engine...

  • Page 3: Limitation Of Liability

    This operating manual provides important Trade name of the item to which this operating information on how to use the HB-8N hydraulic log manual refers - see cover page. splitter. The prerequisite for safe work is correct compliance with all safety instructions and handling instructions.

  • Page 4: Technical Description

    3. Technical Description The hydraulic log splitter is a portable machine tool and can only be used for stationary The machine – hydraulic log splitter HB-8N – is operation. only suitable for splitting wood with a maximum length of 550 mm. Wood may only...

  • Page 5: Safety Instructions

    5. Security 5.2 Safety instructions This section provides a comprehensive WARNING! overview of all important safety aspects for adequate protection of the operator as well as Familiarize yourself with the machine. for safe and trouble-free operation. Proper training is a prerequisite for working safely with this machine.
  • Page 6 and endanger other persons through Operation improper use. Never operate a damaged machine! First-time users should seek instruction from the seller to familiarize themselves with the Only work when you are in good physical condition. characteristics of the machine, its intended use and the necessary safety devices.
  • Page 7 Do not start or run the engine indoors, in a end of work garage or in a confined space. The engine's When carrying out repair or maintenance work, as exhaust fumes contain poisonous carbon well as when leaving the workplace, always switch monoxide.

  • Page 8: Electrical System

    Only use original LUMAG spare parts and switched off and the tools are at a standstill. accessories. The use of other spare parts and In the event of a malfunction, the drive must accessories increases the risk of accidents.
  • Page 9 → Maintain sufficient safety distance. Rinse with water, then consult an ophthalmologist. → Operate the machine calmly and carefully. → When handling the machine, it is essential to wear personal protective equipment (PPE). fire, explosion Risk of fire and slipping due to leaked hydraulic fluid.
  • Page 10 6. Warning and information The machine may only be operated symbols used by one person. Symbols are provided on the machine to Never remove or tamper with any provide important information about the protective or safety devices. product and instructions for use. Keep hands and feet away from DANGER! moving parts.

  • Page 11: Part Designation

    7. Part designation 7.1 Hydraulic log splitter nameplate Equipped with model name, year of manufacture and serial number. Please always state this information when ordering spare parts or for service information. The transport cap must be replaced by the self- venting screw with oil dipstick before commissioning (see “Commissioning”) fuel tap open ON...
  • Page 12 7.2 gasoline engine recoil starter, hand starter handle/starter rope (3 + 2) The starter is designed as a magneto ignition with spring return. Incorrect handling of the recoil starter can damage the starter. Never wrap the recoil starter rope around your hand. choke (4) The choke lever opens and closes the carburetor choke valve.

  • Page 13: Technical Data

    You can reach us splitting force by email: 25~ 55 cm gap length max. 8~ 35 cm gap diameter max. info@lumag-maschinen.de or by phone at +49 28.0 MPa hydraulic pressure 8571/92 556-0. hydraulic oil capacity 4.0 L (HLP46) working speed approx.
  • Page 14 10th assembly The machine is partially pre-assembled. However, a few steps still need to be taken to make the machine ready for use. The tools required for assembly are not included in delivery. Fig. 5 Installing the storage tables 10.2 Mount the control lever (R/L) (Figure B) Mount the operating lever with protective device...
  • Page 15 10.3 Install the splitting table (Figure C) Attach the splitting table to the splitting frame as shown. To do this, the splitting table is hooked on one side and secured on the other side. When viewing this, assume that you are standing in front of the log splitter.

  • Page 16: Transport And Storage

    11. Transport and storage staff – Transport work without the aid of lifting or conveying equipment that requires supervision may only be carried out by trained personnel appointed by the IMPORTANT NOTE! operator. It is best to transport the log splitter upright; if –...
  • Page 17 – Secure the pallet with the goods to be transported with tensioning straps so that the pallet with the goods to be transported cannot tip over; if necessary, correct the center of gravity. It is also important to ensure that the tensioning straps are of sufficient size.
  • Page 18 12th lineup 13. Hydraulics Note on hydraulics The hydraulic oil tank is located at the base of the WARNING! log splitter. The oil tank is filled with hydraulic oil at the factory. The machine must be installed on a firm and level surface.

  • Page 19: Drive Types

    14. Drive types 14.1 Gasoline engine The machine is powered by a petrol engine. For information on starting and switching off the petrol engine, please refer to the engine operating instructions or the following pages of this manual (Section 14.3 / 14.4). IMPORTANT NOTE! Fig.
  • Page 20 2. Wipe the dipstick with a clean cloth and Petrol is extremely flammable and reinsert it, do not screw it in. explosive. Before refueling, turn off the engine and let it cool down. Pull out the dipstick again and read the oil level; if necessary, fill engine oil up to the lower This engine requires only regular unleaded edge of the oil filler opening.

  • Page 21: Storing Fuel

    14.2.3 Storing fuel Only store fuel in containers specifically Fuels can only be stored for a limited time; they approved for this purpose. Store fuel age. Fuels or fuel mixtures that have been out containers in a dry and safe place. of date can lead to starting problems.

  • Page 22: Work Preparation

    First – after starting the engine – pay attention to the Recommended size of the split material movement of the splitting knife.ATTENTION! The splitting knife moves upwards automatically. ACTION HB-8N 25~ 55 cm gap length max. 8~ 35 cm gap diameter max.

  • Page 23: Operation

    16. Operation IMPORTANT NOTE! the Tension always With it remains at a sufficient level, before starting the IMPORTANT NOTE! engine, press and hold one of the control levers down (1.) and start the engine (2.). Then At outside temperatures below 5°C, the release the control lever (3.).
  • Page 24 WARNING! No other persons are allowed to be in the working area of the machine. 16.2 Adjusting the gap length The machine is set to its maximum splitting length upon delivery. When the engine is started, the splitting blade automatically moves to the maximum total stroke height.
  • Page 25 16.3 Releasing jammed pieces of wood It can happen that the material to be split is CAUTION! not split completely and the splitting knife takes the wood upwards when it is raised. She no dry, columns Fresh wood! Seasoned wood is easier to split and will not 1.

  • Page 26: Maintenance Work

    Never work without protective devices. Refit all protective devices after maintenance work. Replace lost screw connections. Only use original LUMAG spare parts. Other parts can cause unforeseeable damage and hydraulic fittings injuries. Check hoses for leaks and tight fit.
  • Page 27 The first oil change should be carried out after approximately 25-30 operating hours. After that, the hydraulic oil should be changed approximately every 50 operating hours or once a year. We recommend the hydraulic oil HLP 46. The following hydraulic oils or equivalent oils of viscosity class HLP 46 are recommended for the hydraulic transmission system: SHELL Tellus 22-46, Esso Nuto H46, DEA HD B46...
  • Page 28 18.6 Wear parts A change will be made as necessary, but no later than after 5 years. wearing parts sliding guides CONTROL WORK under point 17.1 must be observed. from the warranty claim splitting knife excluded, but can be requested through your dealer.
  • Page 29 18.7.2 Checking/replacing the spark plug You can also clean the filter with compressed air (not more than 2.07 bar). 5. Clean the air filter mounting plate and Do not touch the spark plug or the gasket with a damp cloth. Make sure that spark plug connector when the engine no dirt gets into the line to the carburetor.
  • Page 30 Replace the spark plug: – every 100 operating hours or every season – if the insulator is damaged – with large electrode gap – for heavily soiled or oily electrodes Fig. 24 Engine oil change 18.7.3 Muffler/Exhaust Check the muffler (8) regularly. Clean the outlet opening.

  • Page 31: Hydraulic Diagram

    19. Disposal 20. Hydraulic diagram When the machine is no longer serviceable and is to be scrapped, it must be deactivated and dismantled, that is, it must be brought to a condition where it can no longer be used for the purposes for which it was designed.

  • Page 32: Troubleshooting

    21. Troubleshooting WARNING! Any faults in the machine or engine that require major intervention should always be repaired by your LUMAG workshop or an authorized specialist workshop. Improper intervention will void the warranty. POSSIBLE CAUSE PROPOSED REMEDY PROBLEM fuel tank is empty...
  • Page 33 The guarantee for LUMAG products is 24 months for exclusively private use, and 12 months for commercial or Service time: Monday to Thursday from 7:30 a.m. to 12 professional use or rental, from the date of p.m.

  • Page 34: Ce Declaration Of Conformity

    23. CE declaration of conformity In accordance with the provisions of the EC directives Machinery Directive 2006/42/EC EMC Directive 2014/30/EU explains the company LUMAG GmbH Rudolf-Diesel-Straße 1a D-84375 Kirchdorf a.Inn Phone: +49 8571 / 92 556-0 Fax: +49 8571 / 92 556-19...
  • Page 35 24. Components HB-8N Fig. 26 Components WARNING! All repairs to the machine must be carried out by authorized specialist personnel. Have any necessary engine and electrical work carried out only by an authorized specialist.
  • Page 36 NOTES...
  • Page 38 Subject to change! Version HB8N (01.19 D) LUMAG specialist dealer can be found at: www.lumag-maschinen.de LUMAG GmbH Rudolf-Diesel-Str. 1a D-84375 Kirchdorf a.Inn Germany Internet:www.lumag-maschinen.de...

Table of Contents