Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SINO PEVC3108E
Summary of Contents for SINO PEVC3108E
- Page 1 User manual DC EV Charger PEVC3108E Version: V1.01...
-
Page 2: Table Of Contents
Safety and Compliance CONTENT Save these instructions. Read the manual before installation or usage 1 Product Introduction of device. 1.1 Product Description 1) Do not put tools, material or body parts into the electric vehicle connec- 1.2 Product Characteristic tor. 2) Do not use the DC EV charger if the cabinet, power cord or charging 1.3 Product Technical Specifications cable are frayed, have broken insulation or show any other signs of... -
Page 3: Product Introduction
1 Product Introduction 1.2 Product Characteristic 1.1 Product Description The DC EV charger is the top choice for powering battery electric vehicles (BEV) and plug-in electric vehicles (PHEV) today. It is designed for quick charging in both public and private locations, such as retail and commercial parking spaces, fleet charging stations, highway rest areas, workplaces, residences, etc. -
Page 4: Product Technical Specifications
1.3 Product Technical Specifications 1.4 External Structure Dimension drawing Parameter type Description PEVC3108E Power Supply 3P+N+PE Rated voltage 400VAC±10% 1350mm Frequency 50/60Hz 750mm 750mm Input THDi ≤5% Efficiency ≥95% Power Factor ≥0.98 Connector Type CCS2 or CCS2+CCS2 or CCS2+JAP Voltage... -
Page 5: Package Contents
General parts User manual DC EV Charger Hammer drill and PEVC3108E drill bit(φ Electric drill Multimeter Hammer 22mm,7/8 inch) Version: V1.01... -
Page 6: Mounting Process
2.2 Mounting Process Spring washer Flat washer PVC Cable pipe(DN150) Post Ground Ground Foundation(C25Concrete) A-A (Foundation profile) Foundation drilling PVC Cable pipe(DN150) xφ18 (Depth 100) Remove the base cover, expose the wooden bracket fixing screw and remove it to separate the charging stake from the wooden bracket. Cement foundation of charging pile Front... - Page 7 Open the front door and release the input PC shield with a screwdriver. Use a crane or forklift to transport the charging stake to the mounting position and align the four corner reserved screw posts. Use a wrench to tighten the four corner nuts to secure the charging stake to the base.
-
Page 8: Configuration And Operation
3 Configuration and Operation 1) Choose a compatible plug. 3.1 Power-on Checking Please check / re-check the following items prior to initial Power-on: 1) The location of the charger should be convenient for operation and CCS2 maintenance. 2) Before installation of the charger, ensure that the AC input component in the power supply is properly installed with the required protection. -
Page 9: Indication And Fault
4) Once charging commences, status information is displayed on the 6) Return the plug to the holder. screen. The following illustrations demonstrate the start to near com- plete charging procedure. During charging 4 Indication and Fault 4.1 Indicator Status LED Light Status Description of Charging status 5) Swipe the authorized RFID card to stop. -
Page 10: Fault Code And Resolution(Lcd Display)
5 Warranty and Service 4.2 Fault Code and Resolution(LCD display) Fault 5.1 Customer Service Fault Status Troubleshooting suggestion Code We can provide customers with professional product advice and purchase options. All emails will be responded within 48 hours during working days. Check whether the connecting cable of the card reader Card Detector is loose.
Need help?
Do you have a question about the PEVC3108E and is the answer not in the manual?
Questions and answers