Safety and Compliance CONTENT Save these instructions. Read the manual before installation or usage 1 Product Introduction of device. 1.1 Product Description 1) Do not put tools, material or body parts into the electric vehicle connec- 1.2 Product Characteristic tor. 2) Do not use the DC EV charger if the cabinet, power cord or charging 1.3 Product Technical Specifications cable are frayed, have broken insulation or show any other signs of...
1 Product Introduction 1.2 Product Characteristic 1.1 Product Description The DC EV charger is the top choice for powering battery electric vehicles (BEV) and plug-in electric vehicles (PHEV) today. It is designed for quick charging in both public and private locations, such as retail and commercial parking spaces, fleet charging stations, highway rest areas, workplaces, residences, etc.
General parts User manual DC EV Charger Hammer drill and PEVC3107E/PEVC3107U drill bit(φ Electric drill Multimeter Hammer 22mm,7/8 inch) Version: V1.00...
2.2 Mounting Process Power PVC size Spring gasket 60kW/120kW DN100 Fiat gasket PVC cable duct low shell (Diameter Reference Table at Upper Right Corner) Ground Ground Foundation(C25Concrete) Section A-A (Foundation section) Embedded PVC cable (Diameter Reference Table at Upper Right Corner) Foundation drill 4-φ18(Depth 100) Remove the base cover, expose the wooden bracket fixing screw and remove it to separate the charging stake from the wooden bracket.
Page 7
Open the front door and release the input PC shield with a screwdriver. Use a crane or forklift to transport the charging stake to the mounting position and align the four corner reserved screw posts. Use a wrench to tighten the four corner nuts to secure the charging stake to the base.
3 Configuration and Operation 1) Choose a compatible plug (CCS). 3.1 Power-on Checking Please check / re-check the following items prior to initial Power-on: CCS2 CCS1 1) The location of the charger should be convenient for operation and maintenance. 2) Before installation of the charger, ensure that the AC input component in the power supply is properly installed with the required protection.
4) Once charging commences, status information is displayed on the 6) Return the plug to the holder. screen. The following illustrations demonstrate the start to near com- plete charging procedure. During charging 4 Indication and Fault 4.1 Indicator Status LED Light Status Description of Charging status 5) Swipe the authorized RFID card to stop.
5 Warranty and Service 4.2 Fault Code and Resolution(LCD display) Fault 5.1 Customer Service Fault Status Troubleshooting suggestion Code We can provide customers with professional product advice and purchase options. All emails will be responded within 48 hours during working days. Check whether the connecting cable of the card reader Card Detector is loose.
Need help?
Do you have a question about the PEVC3107E and is the answer not in the manual?
Questions and answers