Related Manuals for SKAARHOJ RCPv2
Summary of Contents for SKAARHOJ RCPv2
- Page 1 RCPv2 Joystick User Manual January 9, 2025 SKUs: RCP-JOY-V2B, RCP-JOY-S-V2B Language: English...
-
Page 2: I Disclaimer
For the most up-to-date specifications, refer to the latest SKAARHOJ data sheets or publications. Avail- ability of products and types may vary by country — please check with a SKAARHOJ sales representative for details. -
Page 3: Imprint
SKAARHOJ. If you download files from our website for personal use, ensure you check for updated versions. SKAARHOJ cannot be held liable for downloaded files, as technical data is subject to change without notice. - Page 4 NOTICE indicates a potential risk of equipment or environmental damage. Always follow the rec- ommended actions to avoid damage. Hint HINT provides additional information to clarify or simplify a procedure. It is not related to safety. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
-
Page 5: Table Of Contents
........16 SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... - Page 6 ........30 6 Notes SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
-
Page 7: About This Document
All users must read this manual before using the device for the first time to ensure correct usage. The manual is an important part of the RCPv2 and should be kept easily accessible, close to the device for reference at any time. -
Page 8: Safety Information
• Install cables in a way that prevents tripping. • Use a cable duct or secure cables with adhesive tape if necessary. • Always disconnect cables from the device and accessories before moving them. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... -
Page 9: About Rcpv2
RCPv2 - User Manual 3 About RCPv2 SKAARHOJ’s RCPv2 Joystick is already a classic in precision camera control. It features a joystick fader with a potentiometer pedestal ring, a push-button top, and 8 LED-backlit encoders for settings. The large OLED display, segmented for each encoder, works in concert with four-way buttons for efgcient navigation. -
Page 10: Intended Use
3.3 Product Identification The RCPv2 is identified by a label located on the bottom of the device. This label contains important information such as certification marks, product code, and the serial number. Ensure this label remains intact for future reference and support. - Page 11 • If applicable: The USB-A port’s power is not included in the product’s maximum power rating. If near maximum load, use a powered USB hub to prevent the USB-A port from impacting the overall power budget. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
-
Page 12: Protective Earth
Technical data for RCPv2 are presented in Table 1. 3.5.5 Hardware Components The hardware components of RCPv2, along with their component IDs (HWc ID), are shown in Figure 2. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... - Page 13 Full Reactor and Device Core licenses included Physical and Shipping Product Weight 1213 g Shipping Box Weight 1938 g Country of Origin Denmark Table 1: Detailed specifications and technical characteristics for RCPv2 SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
- Page 14 RCPv2 - User Manual Figure 2: Diagram of hardware components for RCPv2 with component IDs (HWc ID) SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
-
Page 15: Important Notes On Product Usage
Connector: 5.5mm x 2.1mm x 10mm Center Positive • Getting Started Guide For details regarding the warranty, please contact your local SKAARHOJ Service Partner. SKAARHOJ is not liable for any issues arising from improper shipping, misuse, or the use of unauthorized third-party products. -
Page 16: Recommended Accessories
• EN IEC 63000:2018 — Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances Year of afgxed CE-marking: 2025 SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... -
Page 17: Module Compliance Inheritance Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause unde- sired operation. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... -
Page 18: Getting Started
RCPv2 - User Manual 4 Getting Started This chapter provides a basic guide for setting up the RCPv2. The steps apply to most SKAARHOJ controllers and are therefore described in general terms. The basic setup involves: • Powering on the RCPv2 and accessing it via its IP address •... -
Page 19: Accessing Rcpv2
(PoE) or through a network connection and a power supply (5V Micro USB). By default, the RCPv2 will attempt to obtain an IP address via DHCP. If DHCP is unavailable, the device will automatically use the fallback IP address 192.168.10.99 after some time. -
Page 20: Wi-Fi Access Point
• Password: skaarhoj 4.2.2 Wi-Fi Access Point If the RCPv2 does not display an IP address, you can access its web interface by enabling the internal Wi-Fi access point. To activate the Wi-Fi access point, press and hold the config button (located next to the Ethernet port) for approximately 3 seconds. -
Page 21: Link From Skaarhoj Firmware Updater
4.2.3 Link from SKAARHOJ Firmware Updater If the SKAARHOJ Firmware Updater is open on a computer on the same subnet as the RCPv2, the device should appear in the updater’s device list. To open the web interface directly, click on “Configure” next to the panel’s information. -
Page 22: Skaarhoj Firmware Updater And Micro Usb
4.2.4 SKAARHOJ Firmware Updater and Micro USB If the network is not available, you can set the IP address using a Micro USB cable. Connect the RCPv2 to your computer, where it will appear in the “Select Device” dropdown of the Firmware Updater. From there, go to the “IP Config”... -
Page 23: Selecting Default Configuration
If a warning appears, click “Submit” and reboot the RCPv2 to apply the settings. 4.3 Selecting Default Configuration The RCPv2’s function is determined by its configuration, which is selected through a drop down on the Home Screen. In most cases, the Generic configuration is sufgcient. However, for specific panel and device combinations, dedicated configurations may be available. -
Page 24: Adding Devices
RCPv2 - User Manual 4.4 Adding Devices There are two main ways to add devices to a new RCPv2 setup: Auto Discover and Manual Add. 4.4.1 Auto Discover The Auto Discover feature scans the network for compatible devices using mDNS and other discovery methods. -
Page 25: Manual Add
IP address along with any other required details. See Section 4.4.3 for further setup. To add multiple devices manually, hold SHIFT and click the green Add Device button. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... -
Page 26: Device Details
RCPv2 will attempt to connect using the device’s default credentials. 4.4.4 Populating Settings Tables The final step in configuring the RCPv2 is filling in any Settings Tables. These tables are available based on the selected configuration and allow you to specify details such as specific cameras for a PTZ controller or input/output settings for a video switcher. - Page 27 The columns are described in Table 2. The Router Input and Output tables allow configuration of input/output settings, custom display names, and button colors. The columns are described in Table 3. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
-
Page 28: Beyond Default Configurations
To further customize your RCPv2, explore the advanced options in the Configuration Tab in Reactor. For detailed guidance, we recommend our online tutorials and additional resources at wiki.skaarhoj.com. SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52... -
Page 29: Service
5.2 Cleaning Proper cleaning and maintenance of your RCPv2 are critical to ensuring its durability and optimal per- formance. Regular cleaning, when done with care and the right materials, will help maintain the device in excellent working condition. On the other hand, improper cleaning techniques or the use of harsh chemicals can lead to permanent damage to surfaces, connectors, and labels. -
Page 30: Repair
Table 4: Proper cleaning methods for RCPv2 By following these cleaning instructions, you can avoid damaging your device and its components. Routine maintenance will keep your RCPv2 in top condition and reduce the likelihood of damage that could lead to costly repairs or replacements. -
Page 31: Disposal
Notice Disposal of the Product You can return the product at your own expense to the manufacturer, SKAARHOJ ApS, for disposal. Always follow local guidelines and laws for proper disposal. Proper disposal of electronic equipment is essential to reduce environmental impact and ensure that hazardous materials are handled safely. -
Page 32: Skaarhoj Service Contacts
5.6 SKAARHOJ Service Contacts For any inquiries, technical support, or service requests regarding your RCPv2, please reach out to our support team. Our dedicated professionals are ready to assist you with troubleshooting, repairs, and general product information. -
Page 33: Notes
RCPv2 - User Manual 6 Notes SKAARHOJ ApS | VAT: DK39699583 | www.skaarhoj.com | +45 31 12 52 52...
Need help?
Do you have a question about the RCPv2 and is the answer not in the manual?
Questions and answers