Download Print this page

Old Blood Noise Endeavors Dark Star Instruction Manual

Stereo soundscape reverb

Download this manual

instruction manual

Need help?

Do you have a question about the Dark Star and is the answer not in the manual?

Page 1 instruction manual...
Page 2 Dark Star is a reverb pedal. In fact, it is historically our most popular reverb pedal. People bonded with its warmth and aliasing, its long trails and the way it encouraged you to turn the mix fully up. Now, Dark Star expands on the promise of ambient reverb: it is a pitch shifting, bit crushing, ltered stereo reverb with just about every feature you could ask for.
Page 3 . The routing and trails settings will save globally. To Factory Reset your Dark Star, hold Bypass and Aux for 10 seconds until all LEDs begin blinking. At this point, you can cancel the reset by pressing Bypass. To con rm the reset, press Aux. All LEDs will light, then count upward as all settings and presets are returned to default, then light once more, then return to normal operation.
Page 4 03 MIDI Functions The MIDI In and Out jacks are 3.5mm TRS Type A connections. MIDI In receives messages for Dark Star to process. MIDI Out sends those messages back out, acting like a MIDI Thru. By default, Dark Star is on Channel 1. The Channel can be changed via CC (see below).