Related Manuals for Euhomy CIM-02
Summary of Contents for Euhomy CIM-02
- Page 1 Commercial ice machine Instruction Manua SKU：CIM-02 Email：support@euhomy.com Facebook：@Euhomy.Official...
- Page 3 Email: support@euhomy.com Facebook: @Euhomy.Official The Euhomy team is available 24/7 to address your questions, comments, and concerns. Your satisfaction is our ultimate goal. We want to make everything right so you'll share your positive experience with other shoppers on Amazon.
-
Page 4: Table Of Contents
Contents Important Safety Instructions 02-04 05-06 Specifications 07-09 Installation Instructions 10-11 Unpacking Your Ice Maker 12-15 Electrical Requirements And Connections 16-17 Operating Your Unit 18-19 Wiring Diagram 20-24 Cleaning And Maintenance 25-26 Normal Troubleshooting Warranty... -
Page 5: Important Safety Instructions
Important Safety Instructions When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Use this appliance only for its intended purpose as described in this owner's manual. This ice maker must be properly installed in accordance with the installation instructions before it is used. - Page 6 Important Safety Instructions WARNING: Do not damage the refrigerant circuit. WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 7 Important Safety Instructions CAUTION: Risk of Fire or Explosion. Flammable Refrigerant Used. Consult Repair Manual/Owner's Guide Before Attempting to Install or Service This Product. All Safety Precautions Must Be Followed. CAUTION: Risk of Fire or Explosion. Dispose of Property in Accordance With Federal or Local Regulations.
-
Page 8: Specifications
Specifications 1)Dimensions/connections... - Page 9 Specifications 2) Rating CIM -02 Power Supply Single-phase,110-120v/60hz Climate Class 10-40℃ Electrical - protection Class Ice-making Rating 9.7 a Ice -making Capacity 19 0kg/24hr Refrigerant Charge R290 3.88 oz/110 g Net Weight Ice Maker 81lb Ice Bin 62lbs Vesicant Unit Dimensions(W×d×h) 668×580×1,610mm Power Cord—16AWG Connection...
-
Page 10: Installation Instructions
Installation Instructions Main machine assembly 1. Screw the 4 adjustable feet into the bottom of the ice cabinet. (Note: The feet should be hand-tight and not too loose.) 2. Put the ice cabinet on the floor. Set the bin on top of the ice cabinet. (Note: The bin should be firmly in place after completing the installation.) About The Machine I. -
Page 11: Operation Panel
Installation Instructions Accessories Water drain pipe, white, 3 meters Quick connector for water faucet Water supply pipe, white, 5 m long and 9.52 mm in diameter Adjustable feet (x4) II. Mechanism A. Distribution pipe (Water flows through small holes when making ice.) B. - Page 12 Installation Instructions C. LCD display area 1. Ambient temperature display and ice-making countdown display: “M” indicates the ice-making countdown time, and “F” indicates the ambient temperature. 2. Ice-making and deicing symbol display: A rotating symbol indicates that the machine is making ice, whereas a flashing symbol indicates deicing.
-
Page 13: Unpacking Your Ice Maker
Unpacking Your Ice Maker Unpacking Your Ice Maker 1. Remove the exterior and interior packaging. Check that all accessories (listed below) are included and contact our customer service department if anything is missing. a.Instruction manual b.Ice scoop c.White water-inlet pipe d.L-shaped 3-point quick-connector to 3-point plug e.Adjustable feet (4 ea.) f.4-way to 3-way water pipe quick-connector... - Page 14 Unpacking Your Ice Maker a) This unit is not for outdoor use. Ensure the proper room temperature and inlet water temperature according to the above specification table. Otherwise, ice making will be affected. b) This unit should not be located near any heat source. c) The unit must be installed so that it will remain stable and not shake or be bumped.
-
Page 15: Electrical Requirements And Connections
Electrical Requirements And Connections Electrical Requirements And Connections Warning: This Unit Must Be Grounded. Electrical Shock Hazard Plug into a grounded wall outlet. Never remove the grounding prong. Use a separate power supply or receptacle. Never use an adapter. Never use an extension cord. Failure to follow these instructions can result in death,fire,or electrical shock. - Page 16 Electrical Requirements And Connections Cleaning Your Ice Maker Before First Use Before using your ice maker, it is strongly recommended to clean it thoroughly. 1. Open the door to the ice bin. 2. Clean the interior of the bin with diluted detergent, warm water, and a soft cloth. 3.
- Page 17 Electrical Requirements And Connections 2. Connect the water drain pipe. Screw the white drainpipe assembly into the drainage port of the ice bin. Connect the other end of the drainpipe assembly to the sewer pipe. ice bin drainpipe 3. Connect the ice maker to the drain of the ice bin. When the mechanism is placed on the cabinet, the drain (position A, shown below) of the mechanism needs to be connected with the hole of the drain baffle on the cabinet (position B, shown below).
- Page 18 Electrical Requirements And Connections STEP 1: Attach STEP 2: Remove the STEP 3: Insert water STEP 4: Reattach clip quick-connector to clipper hose completely water faucet Remove Push the clipper inwards...
-
Page 19: Operating Your Unit
Operating Your Unit Control panel and display area diagram Making ice 1. Turn on the ice machine: Plug in the unit. The power symbol will flash. Press the “ON/OFF” button. The external water pipe will add water to the tank through the solenoid valve. The machine will start to self-clean after the water is tank is full. - Page 20 Operating Your Unit 3. Adjust the ice thickness: The number in the bottom left of the display window is the setting of the ice-making time (default is 0). Press “+” to increase the time in 1-minute increments for thicker ice. Press “-”...
-
Page 21: Wiring Diagram
Wiring Diagram Note: Not all models feature the fans pictured inside the dotted lines. Normal Sounds Your new ice maker may make unfamiliar sounds. Most of these sounds are normal. Hard surfaces such as flooring, walls, and cabinets can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. -
Page 22: Preparing The Icemaker For Long Storage
Wiring Diagram Preparing the Ice Maker for Long Storage If the ice maker will not be used for a long time or is to be moved to another place, it is necessary to drain out all of the water in the system. 1. -
Page 23: Cleaning And Maintenance
Cleaning And Maintenance WARNING: Before carrying out any cleaning or maintenance operations (with the exception of the self-clean- ing program), unplug the ice maker from the main power supply. Do not use any alcohol or fumes for cleaning/sanitization of the ice maker. To do so may cause cracks in the plastic parts. -
Page 24: Interior Cleaning
Cleaning And Maintenance Interior Cleaning For Ice Storage Bin The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the first time or reused after an extended period of disuse. It is usually convenient to sanitize the bin after the ice-making system has been cleaned, when the storage bin is empty. - Page 25 Cleaning And Maintenance 3. When there are ice cubes stuck to the surface of the evaporator, do not use any tools to remove the ice by force. Instead, press the “ON/OFF” button for more than 5 seconds. The unit will enter the defrosting mode.
- Page 26 Cleaning And Maintenance 1.Turn off the ice maker. Keep the ice maker connected to the water supply and drainpipe, but shut off the faucet of the main water supply. 2. Open the door and scoop out all of the ice cubes. Either discard them or save them in an ice chest or cooler.
-
Page 27: Cleaning Suggestions
Cleaning And Maintenance WARNING: The ice-machine cleaner contains acids. DO NOT use or mix cleaner or cleaning solution with any other solvent-based cleaning products. Use rubber gloves to protect hands. Carefully read the material safety instructions on the container of the ice-machine cleaner. DISCARD the first batch of ice made after cleaning. -
Page 28: Normal Troubleshooting
Normal Troubleshooting Problem Possible Cause Solution Check the main water-supply pressure. Check the water-supply hose for blockages. No water supply Increase the water pressure or clean the hose as necessary. NFloating ball of the water level-detecting Clean the water tank and the water The whole “... -
Page 29: Error Indicator
Normal Troubleshooting Error Indicator a) Temperature sensor breakdown: “E1” is displayed. b) No ice or refrigerant leakage: “E2” is displayed. c) Magnetic control switch cutoff: “ ” light will be on when plugging in or just turning on the unit. And it Disengage after open circuit. d) During the ice-making process, press the “ON/OFF”... -
Page 30: Warranty
Warranty Euhomy offers a limited 1-year warranty (“ warranty period" ) on all of our products purchased new and unused from Euhomy company, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty pe9od. - Page 32 Email：support@euhomy.com Facebook：@Euhomy.Official...
Need help?
Do you have a question about the CIM-02 and is the answer not in the manual?
Questions and answers