Advertisement
Quick Links
4. Place the small plugs into the screw holes to cover these.
To remove the plugs, simply use your fingernail or a knife to pull the top of the
caps away from the hole to be able to remove it.
ATTENTION: One of the plugs is slightly bigger, this is for the hole closest to
the leading edge of your wing. The smaller plug fits into the hole closer to
the trailing egde of your wing.
5. To cover the not needed connection points below the boom (5) use the
provided caps. Place the cap on the connection point and use the M6x16
TX25 screws to assemble them. Thighten the screws up to 2NM.
3
4
2
5
5
FUSION HANDLES & BOOMS
User Manual
For further information please visit:
www.duotonesports.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DUOTONE ss25
Summary of Contents for DUOTONE ss25
- Page 1 4. Place the small plugs into the screw holes to cover these. To remove the plugs, simply use your fingernail or a knife to pull the top of the caps away from the hole to be able to remove it. ATTENTION: One of the plugs is slightly bigger, this is for the hole closest to the leading edge of your wing.
- Page 2 1. CONNECTING HANDLES 1. Lay the foil wing down on sand, grass or a surface free of hard or sharp 4. Place the small plugs into the screw holes to cover these. objects as they could damage it. 2. Place the handles on the connection points as shown in the graphic. Long ATTENTION: One of the plugs is slightly bigger, this is for the hole closest to handle in the front, shorter handle in the back.
Need help?
Do you have a question about the ss25 and is the answer not in the manual?
Questions and answers