NexiGo LT01s Manual

What's in the Box

1 x Smart LED Lamp
1 x Power Adapter
1 x USB Cable
1 x Quick Start Guide
1 x User Manual

Product Diagram

Specifications

Physical Controls

Button Usage Instructions: Buttons will have different effects depending on what settings you are working with. It is recommended to use the app to change settings as not all settings can be changed using the physical buttons.

1. Power
   1. Tap to turn the lamp on or off.
2. Brightness Adjustment
   1. To dim the light press and hold when the light is at maximum brightness. This is only active when the lamp is in any of the White Light Mode.
   2. To increase the brightness of the light press and hold the . This is only active when the lamp is in any of the White Light Mode.
3. Change Light Color
   1. Tap to change the Light Mode of the lamp. The five possible modes are White Light Warm, White Light Neutral, White Light Cool, RGB, and Cycling RGB.
   2. While in RGBMode, tap and hold to cycle through the available colors on the smart lamp.
   3. While in RGB Cycling Mode, tap and hold to increase or decrease the speed that the lamp will cycle through the colors.
4. Automatic Timer
   1. Tap to set a timer to automatically turn the lamp off after a duration. When one green light indicator is showing, the lamp will turn off after 30 minutes. When two green light indicators are showing, the lamp will turn off after 60 minutes. When two white light indicators are showing, the automatic timer function is inactive.
   2. Tap and hold for at least 5-10 seconds to pair the light via Wi-Fi & Bluetooth.

Connecting the Smart Table Lamp with Your App

1. Download App:

To download the app search 'NexiGo Home' from App Store or Google Play. Alternatively, you can scan the QR code below to download the 'NexiGo Home' App.

2. Register/Log in:
   If you have not used the app before, you will need to register in order to access it. If you have already registered, you will need to log in using the name and password you created.
   
3. Turn on Wi-Fi and Bluetooth on Your Device:
   Ensure that your device has both Wi-Fi and Bluetooth turned on before attempting to pair it with the Smart Table Lamp. Only 2.4 GHz Wi-Fi signals are supported. Do not attempt to use the 5.0 GHz band as it will not function.
   
4. Turn on Wi-Fi & Bluetooth Pairing Mode on the Lamp:
   Press and hold the timer for 5-10 seconds and the indicator will begin to flash green.
   
5. Connect the Lamp to your APP:
   Open the NexiGo Home application, you will see the home screen shown on the left below. Press the Add Device button on the app, and then at the top of the next screen select the tab that says Auto Scan. The smart lamp will then be detected by the app and a popup box will appear as shown on the right below.
   
6. Connect the Lamp to Wi-Fi:
   Once the lamp connects to the app, it will then prompt you to hook the lamp up to your Wi-Fi so you can connect it to your smart home network. A popup box will appear as shown above. Tap on Next and choose your Wi-Fi network from the list of options, enter the password for the Wi-Fi and tap Next to finish the connection.
   

How to Use the App

1. White Light Mode:
   Select the color temperature from warm white to cool white, you can also choose from preset values using the four buttons at the top.
   
2. Color Mode:
   Select color and adjust brightness and saturation. Choose from four preset colors at the top of the screen.
   
3. Scene:
   The application comes with eight (8) different preset lighting scenarios.
   
   
4. More Functions:
   1. Plan
      Use the lamp to set a visual alarm. When the alarm goes off the light will turn on at a low brightness. As the alarm continues the light will slowly increase brightness.
      (NO SOUND)
      
   2. Schedules
      Automate your lights to turn on or off at preset time. Set automated home lighting schedules.
      
   3. Timer Function
      Set a timer to turn off the lamp.
      

Note: If you turn off the lamp, any active timers will be deactivated.

Voice Control with Amazon Alexa & Google Assistant

Using Amazon Alexa & Google Assistant: (Please make sure that the light is plugged into wall power, not a USB port for power, before using voice assistance. USB may not provide enough power to fully utilize all of the light features.)
While in the NexiGo Home App, tap Me and then select the Third-Party Voice Service you wish to use (Alexa or Google Assistant).

You can then provide your assistant commands, such as:

• Turn on/off the bedroom light
• Set bedroom light to 50 percent
• Brighten bedroom light/dim bedroom light
• Set bedroom light to green
• Set bedroom light warm white

This will open the application and connect the smart device to receive voice commands. Follow the prompts until Alexa or Google Home have established the connection and the voice command feature will be enabled.
Note: Google has some interference between their color selections and the options available in the lamp. Not all colors through Google Assistant will be able to be applied.

Note:

• Only use a DC 5V/1.5A adapter with the provided USB cable to power the unit. Using any other power adapter or cable may cause damage to the product.
• To use the intended smart app control and voice control functions, the lamp must be connected to the NexiGo Home app.
• This smart lamp only supports 2.4 GHz Wi-Fi.
• When this unit is not in use or when fully charged, it is recommended that you unplug it from the power source.
• Please use a lint-free dry cloth to clean the product. Do Not clean the product with water or alcohol. Ensure the unit is unplugged and powered off before cleaning.
• Do not charge the light using a frayed or damaged USB cable.
• Do not touch the device, power adaptor, or USB cable with wet hands. Keep this product dry.
• Do not attempt to repair, disassemble, or modify the light under any circumstance.
• Do not place the light near the fire, heat sources, or direct sunlight.
• Ensure that this product has enough ventilation for general use.
• Only use on a flat, horizontal surface.
• To ensure the longevity and lifespan of the unit, protect it from dust and do not place other objects on it.

Contact Information

Website: www.nexigo.com
Manufacturer: Nexight INC
Email: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th st, Beaverton, OR, 97005, US
Get in touch with FREE online services
facebook.com/nexigo1