Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Chameleon Antenna Manuals
  4. Tuner
  5. URT-1500
  6. Basic operation

Chameleon Antenna URT-1500 Basic Operation

Automatic antenna tuner
Hide thumbs Also See for URT-1500:
1
2
3

Advertisement

Quick Links

Download this manual
The URT-1500 is a high power remote automatic antenna tuner. Please use the stainless steel
bracket and clamp in the tuner packaging box to fix the tuner to the mast.
Rear panel of the coupler.
Notes when connecting the coupler:
1.Please make sure that the voltage of the power supply connected to the coupler is within
the range of 12-14V and can provide a current of no less than 2A. Too low a voltage may
cause the coupler to not work properly, and too high a voltage may damage the coupler
and tuner.
2. Please use a simple coaxial cable to connect "TO TUNER" to the tuner. This cable also
provides DC power to the tuner, so it is not allowed to be connected to any device, such
as a balun, etc.
Front Panel of the coupler
Indicator Lights:
"TUNER"
URT-1500 AUTOMATIC ANTENNA TUNER
Power indicator for the tuner.
1 / 3
Basic Operation

Advertisement

loading
Need help?

Need help?

Do you have a question about the URT-1500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chameleon Antenna URT-1500

Summary of Contents for Chameleon Antenna URT-1500

  • Page 1 URT-1500 AUTOMATIC ANTENNA TUNER Basic Operation The URT-1500 is a high power remote automatic antenna tuner. Please use the stainless steel bracket and clamp in the tuner packaging box to fix the tuner to the mast. Rear panel of the coupler.
  • Page 2 “ERROR” Fault indicator. When it is lit, it means that the RF output socket of the coupler is short-circuited by DC. Please turn off the power of the coupler immediately and restart it after troubleshooting. Please note that this warning indicator can only be reset by restarting the power.
  • Page 3 To ensure that the tuner is not damaged by rain, the tuner must be installed with the base plate with the wiring terminals facing downward and parallel to the ground. ● Frequency Range: 1.8 ~ 30 MHz ● Input Power Capability: 1500W(SSB)，800W(DATA mode) ●...