Download Print this page
Chameleon Antenna CHA LRT Operator's Manual

Chameleon Antenna CHA LRT Operator's Manual

Loop remote tuner

Advertisement

Quick Links

Loop Remote Tuner
(CHA LRT)
Operator's Manual
Nevada - USA
WWW.CHAMELEONANTENNA.COM
VERSATILE – DEPENDABLE – STEALTH – BUILT TO LAST
CHA LRT
Page 1

Advertisement

loading

Summary of Contents for Chameleon Antenna CHA LRT

  • Page 1 Loop Remote Tuner (CHA LRT) Operator’s Manual Nevada - USA WWW.CHAMELEONANTENNA.COM VERSATILE – DEPENDABLE – STEALTH – BUILT TO LAST CHA LRT Page 1...
  • Page 2: Table Of Contents

    Parts of the Loop Remote Tuner ....................... 3 Installation of the Loop Remote Tuner ..................... 4 Loop Remote Tuner Operation ......................... 9 Troubleshooting ............................10 Preventive Maintenance ......................... 10 Specifications ............................10 Chameleon Antenna Products ......................11 CHA LRT Page 2...
  • Page 3: Introduction

    20 feet from the operating position, such as on a balcony or deck, and enables more precise tuning of the loop. The CHA LRT will only work with the CHA F-LOOP 3.0. Also, this is an electric device for mechanically rotating the loop tuning unit capacitor in place of the standard manual tuning knob –...
  • Page 4: Installation Of The Loop Remote Tuner

    Please use the following procedure to properly install the CHAR LRT to your CHA F-LOOP 3.0. Note that the CHA LRT will only work with the CHA F-LOOP 3.0. In addition to the supplied components, shown in plate (1), you will need a #2 Phillips Screwdriver.
  • Page 5 4. Place Aluminum Bracket (D) over front of Tuning Unit, as shown in plate (4). 5. Install two Long Machine Screws (E) with washers in the holes on top of the Aluminum Bracket, as shown in plate (4). Do not completely tighten the screws. Plate 4. Aluminum Bracket Installation. CHA LRT Page 5...
  • Page 6 (7). 11. Ensure the Motor Assembly (B) flange is flush with the Aluminum Bracket (D) 12. Insert the supplied Allen Wrench (G) into the Motor Assembly (B) flange channel and tighten the first shaft set screw. CHA LRT Page 6...
  • Page 7 Plate 6. Remote Tuner Unit Connection. Plate 7. Tightening Shaft Set Screws. CHA LRT Page 7...
  • Page 8 DO NOT adjust, tighten, or loosen the set screw on the shaft of the Motor Assembly, see plate (7). 15. Tighten Machine Screws (E) & (F), as shown in plate (8). 16. This completes the installation procedure for the Loop Remote Tuner. Plate 8. Completed Loop Remote Tuner. CHA LRT Page 8...
  • Page 9: Loop Remote Tuner Operation

    Decreases resonant frequency of the Loop Antenna by many steps/increments. >> Increases the resonant frequency of the Loop Antenna by many steps/increments. > Increases the resonant frequency of the Loop Antenna by one step/increment. Table 1. Remote Tuner Unit Controls and Connection Description. CHA LRT Page 9...
  • Page 10: Troubleshooting

    Remote Operation: Maximum of 20 ft. from operating position. • Dimensions: Remote Tuner Unit: 4 5/8 in. x 3 1/8 in. x 1 in. (H x W x D). Motor Assembly: projects 4 1/2 in. from Tuning Unit, 1 3/8 in. diameter. CHA LRT Page 10...
  • Page 11: Chameleon Antenna Tm Products

    Chameleon Antenna Products Please go to http://chameleonantenna.com for information about additional quality antenna products available for purchase from Chameleon Antenna – The Portable Antenna Pioneer. CHA LRT Page 11...