Magic Chef MC77MW User Manual page 13

TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place.
For new installations, make sure all packaging and shipping tape has been removed from
the turntable shaft. Before using the appliance to prepare food for the first time, you will
need to put the turntable in place correctly. You must clean the cooking compartment and
accessories.
1
2
Notes:
1. Never use the appliance without the turntable. Make sure that it is properly engaged.
The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should never be restricted.
3. Both glass tray and turntable ring assembly must always be used during cooking.
4. All food and containers of food are always placed on the glass tray for cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door. Do not install if oven is
damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the waveguide cover that is attached to the oven cavity to protect the
magnetron.
How to put the turntable in place:
1. Place the turntable ring assembly ③ into
the recess in the cooking compartment.
2. Place the glass tray ① on the turntable
ring assembly ③. Fit the raised, curved
lines in the center of the glass tray
bottom between the three spokes of the
shaft. Make sure that the glass tray ①
engages in the turntable shaft ② in the
centre of the cooking compartment floor.
3
The rollers on the shaft should fit inside
the turntable bottom ridge.
EN-10