DALCNET MICRO-1CV User Manual

FEATURES
 LED DIMMER
 Power Supply: 12-24-48 Vdc
 Voltage Output for strip LED and LED module
 WHITE and MONOCHROMATIC Light Control
 MULTI INPUT - Analogic Automatic Detection of the Local command:
Normally Open (N.O.) push-button
o
Analog input 0-10 V
o
Analog input 1-10 V
o
Potentiometer 10 kΩ
o
 Device configuration via PUSH MENU, parameters that can be set:
Minimum value of dimming
o
Fade IN/OUT time
o
PWM Frequency
o
 Constant voltage output for Resistive LED load
 Memory function
 Sync function - Master/Slave
 Soft ON/OFF
 Optimized output dimming curve
 Extended temperature range
 100% Functional Test - 5 Years warranty
PRODUCT DESCRIPTION
MICRO-1CV is a 1-channel Pulse Width Modulation (PWM) Constant Voltage (CV) LED dimmer. It can be powered from a constant
voltage (12 ÷ 48) Vdc SELV power supply and is suitable for driving a load such as Strip LED and White/Monochrome LED modules
at constant voltage. The dimmer can be controlled via Normally Open (N.O.) push-button, analog input 0/1-10V, or via a 10 kΩ
potentiometer; the automatic detection of the local control that ensures the proper functionality related to the type of the connected
control.
MICRO-1CV can deliver a maximum output power up to 78 W (@12V) or 150 W (@24/48V) and has the following protections:
over-voltage and under-voltage protections, reverse polarity protection, input fuse protection and open-circuit protection.
Through the Push Menu are possible to configure multiple parameters including dimming frequency, Fade In/Out time values and
minimum brightness level.
⇢ For the up-to-date manual, please consult our website
smartphone
1
If operating with L-C loads, contact us for technical support.
DALCNET S.r.l.
36077 Altavilla Vicentina (VI) – Italy
Via Lago di Garda, 22
MICRO-1CV
User Manual
1
www.dalcnet.com or scan the QR Code from your
Made in Italy
Tel. +39 0444 1836680
www.dalcnet.com – info@dalcnet.com
Rev. 10/10/2024 - Pag. 1/12