Chicco DUCATI MONSTER Manual page 7

• To replace spent batteries: Loosen the screw on the battery compartment cover with a screwdriver
and remove the cover. Then remove the spent batteries and fit new ones, ensuring that they have
been fitted in the correct polarity (as shown on the product), close the battery cover, and tighten the
screw.
• Only use alkaline batteries of the same type or equivalent to the type recommended for the correct
function of this product.
• Never mix new and old or different types of batteries.
• Always keep batteries and tools out of reach of children.
• Do not short-circuit the battery terminals.
• Always remove spent batteries from the toy to avoid the danger of leakage from the battery damaging
the product.
• Always remove the batteries if the toy will not be used for a long period of time.
• Remove the batteries from the toy before disposing of the product.
• Do not burn or dispose of spent batteries into the environment. Dispose of them at an appropriate
differentiated collection point.
• In the case of leakage, replace the batteries immediately, taking care to clean the battery compartment
and to wash your hands, if they have come into contact with the battery liquid.
• Do not attempt to recharge non-rechargeable batteries, as they might explode.
• The use of rechargeable batteries is not recommended, since it might impair the toy's functionality.
• If rechargeable batteries are used, take them out of the toy before recharging them. Batteries must
always be recharged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
This product complies with EU Directive 2002/96/EC
The crossed bin symbol on the appliance indicates that the product, at the end of its life,
must be disposed of separately from domestic waste, either by taking it to a separate waste
disposal site for electric and electronic appliances or by returning it to your dealer when you
buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal
site at the end of its life. If the disused appliance is collected correctly as separate waste, it can be
recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment
and health, and contributes towards the recycling of the product's materials. For further information
regarding the waste disposal services available, contact your local waste disposal agency or the shop
where you bought the appliance.
This product complies with EU Directive 2002/95/EC
HOW TO ASSEMBLE THE TOY
Handles:
Insert the handles fully into the handle bar. A click will indicate that the handles have been fitted
correctly into position (Diag. 1).
Wheels:
To fit the side wheels, it is necessary to loosen the two screws that fix the caps to the rear fork and then
remove them (Diag. 3).
Then fit the plate with the wheel and fix it with the nut (Diag. 4). Lastly, fit the cap and fix it to the fork
with the two screws (Diag. 5-6).
Ensure that the wheel has been locked correctly into position.
Repeat the above operations with the other wheel.
7