NMEA-0183 standard. NMEA In Connect the ‘a’ and ‘b’ terminals of the listener port on the MiniPlex-Lite to the ‘a’ and ‘b’ terminals of the talker port on the instrument. Other designations used are ‘Data +’ and ‘Data -’, ‘TX+’ and ‘TX-’...
Page 3
The talker port can be connected to up to four instruments and/or an autopilot. Connect the ‘a’ and ‘b’ terminals of the talker port on the MiniPlex-Lite to the ‘a’ and ‘b’ terminals of the listener port(s) on the instrument(s). Other designations used are ‘Data +’ and ‘Data -’, ‘RX+’ and ‘RX-’ or ‘In +’...
COM1 to COM4 to be selected. More than one MiniPlex-Lite can be connected at the same time. Every new unit will create a new virtual serial port. The number of this port will always be assigned to the same unit.
Page 5
Mounting The MiniPlex-Lite is not waterproof. It should be mounted at a dry place, like behind the instrument panel, on a flat surface.
9403 DD Assen The Netherlands Tel.: +31 592 375700 Declare under our sole responsibility that the product ShipModul MiniPlex-Lite to which this declaration relates is in conformity with the following specifications: EN/IEC61000-6-1:1997 and EN/IEC61000-6-3:1996 EN/IEC61162-1:2000 FCC Title 47 CFR, Part 15 Class B The product herewith complies with the requirements of the EMC Directive 89/336/EEC and carries the CE-marking accordingly.
Need help?
Do you have a question about the MiniPlex-Lite and is the answer not in the manual?
Questions and answers